Print Page | Close Window

CA Measurement Questions

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195747
Printed Date: 26 Aug 2025 at 8:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: CA Measurement Questions
Posted By: dfwallis
Subject: CA Measurement Questions
Date Posted: 18 Jun 2023 at 7:49pm
Before I bother my brother (more), does anyone already have measurements (rough ok) for:

1. Width measured between the left and right final drive rear cultivator brackets (or hub to hub might be close enough for me to get started as I can always cut length off later).

2. Approximate vertical rise from drawbar to the cultivator bracket (again I'll design with spare to shorten later but I don't want to assume 4 feet when it's only 1 foot).

3. Approximately how far forward of the axle (or the cultivator brackets) is the drawbar attachment point?


Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net