Farm Equipment - 303 and 302 balers

Print Page | Close Window

303 and 302 balers

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195590
Printed Date: 22 Aug 2025 at 10:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 303 and 302 balers

Posted By: ACkojack
Subject: 303 and 302 balers
Date Posted: 07 Jun 2023 at 9:10pm

Does anyone know if the parts from the 302 and 303 balers are interchangeable?

Replies:

Posted By: DrAllis
Date Posted: 07 Jun 2023 at 9:17pm

I believe so. Biggest difference in the 303 has a long tongue and three u-joint PTO shaft.

Posted By: Mikez
Date Posted: 07 Jun 2023 at 9:20pm

What parts do you have in mind when asking

Posted By: Tracy Martin TN
Date Posted: 07 Jun 2023 at 9:35pm

There were several parts that changed during production. There are serial number breaks in parts manual. Pickup drive and feeder house drive. There were others that not such a big deal. HTH Tracy

-------------
No greater gift than healthy grandkids!

Posted By: DanielW
Date Posted: 08 Jun 2023 at 4:30am

Both are still listed in the Agco parts books (you can access for free online), and it looks like the majority of parts are the same. But you can always look at the parts books at the specific part you need and see if it matches.

If it's knotter parts you're after, they're almost certainly the same as each other, and also the same as New Holland balers of the same era. They all used the same Rasspe knotters.

Link to the parts book for 302 & 303:

https://na.apb.agcocorp.com/p/agcoallis/79001525/l" rel="nofollow - https://na.apb.agcocorp.com/p/agcoallis/79001525/l