i600 Forklift shuttle assist
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=195501
Printed Date: 31 Oct 2025 at 9:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: i600 Forklift shuttle assist
Posted By: d restorer
Subject: i600 Forklift shuttle assist
Date Posted: 02 Jun 2023 at 11:49am
|
Well, I’m finally getting into my i600 forklift restoration but I’m
having a problem as I want to bring back the shuttle assist foot pedal that
someone before me dismantled and threw the parts out, they welded the foot
pedal to the floor. The only part left is one hydraulic cylinder, there was supposed
to be 2 cylinders and a 3rd unit that connected to the foot pedal, I’m looking
to see if anyone knows where to find these parts as I have searched up and down
the internet with no mention of anything close. If I even had the main cylinder
which is the controller one connected to the foot pedal as a reference so I
could machine a new one. I have used my forklift for years and always
wanted to restore it as it's an awesome unit and well worth the
investment. Any info to this situation would be helpful.  |
Hi allReplies:
Posted By: TramwayGuy
Date Posted: 02 Jun 2023 at 5:13pm
| Was it a shuttle clutch with internals analogous to the manual shuttle which was available on the D14/D15? Just curious. The cylinders wouldn’t have to be very large to do what it needed to do. And the pedal probably just directed the flow to the appropriate cylinder. |
Posted By: d restorer
Date Posted: 02 Jun 2023 at 7:57pm
The pedal opened hydraulic flow to a small
cylinder which then moved the shuttle shaft, check out the photo, it looked
like a good design, and I don’t know why someone would dismantle it. |