Construction and other equipment

Print Page | Close Window

HD6G parts needed

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194805
Printed Date: 30 Oct 2025 at 8:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: HD6G parts needed

Posted By: IH Steve
Subject: HD6G parts needed
Date Posted: 24 Apr 2023 at 3:30pm

Hi Does anyone know where I could get parts for my HD6G crawler loader ? I need the drive shaft universal joint and some of the floor plates. If anybody has some let me know. Thanks

Replies:

Posted By: DMiller
Date Posted: 24 Apr 2023 at 5:21pm

Try General gear, Boise, one of the last holdouts with ACs

Posted By: Coke-in-MN
Date Posted: 24 Apr 2023 at 5:49pm

Most AC parts are off the shelf parts so U Joints would be auto parts store if similar to my HD5 type

-------------
Life lesson: If you’re being chased by a lion, you’re on a horse, to the left of you is a giraffe and on the right is a unicorn, what do you do? You stop drinking and get off the carousel.

Posted By: Les Kerf
Date Posted: 25 Apr 2023 at 7:22am

General Gear:
https://www.tractorparts.com/" rel="nofollow - https://www.tractorparts.com/

Posted By: CAL(KS)
Date Posted: 25 Apr 2023 at 8:57am

I have a floor plate but im in Kansas

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: IH Steve
Date Posted: 25 Apr 2023 at 9:03am

Tried General Gear but they don't have what I need right now. Are the drive shaft parts for an HD5 or 7G the same as my HD6G?

Posted By: Codger
Date Posted: 25 Apr 2023 at 9:11am

I would ask General Gear what driveline is/was installed into your tractor. Once you know the joint sizes, a shaft is easily fabricated but less $$$ if used can be located.

-------------
That's All Folks!

Posted By: IH Steve
Date Posted: 25 Apr 2023 at 9:33am

The floor is in 3 different pieces. I need the 2 front pieces plus the part that goes upright in front of the brake petals. If you have those I would pay for shipping.

Posted By: Ray54
Date Posted: 25 Apr 2023 at 11:30am

Zimmerman or something close to that operates in Missouri and does used crawler parts.Here in Calif. Fresno Tractors has number of HD 6's in the inventory of parts tractors. As well as FP Smith might have some parts too.

Posted By: CAL(KS)
Date Posted: 25 Apr 2023 at 3:11pm

IH Steve wrote:

The floor is in 3 different pieces. I need the 2 front pieces plus the part that goes upright in front of the brake petals. If you have those I would pay for shipping.

PM me your phone number and i will take some pictures and send to you.

-------------
Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20

Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15

Posted By: IH Steve
Date Posted: 25 Apr 2023 at 3:51pm

CAL(KS) wrote:

IH Steve wrote:

The floor is in 3 different pieces. I need the 2 front pieces plus the part that goes upright in front of the brake petals. If you have those I would pay for shipping.

PM me your phone number and i will take some pictures and send to you.

I contacted Zimmermann Tractor and they have several HD6's available so they're checking to see if they have what I need. If not I'll let you know. Thanks.
Here's to anybody else who needs parts. Zimmermann Tractor has new and used crawler loader and dozer parts.