Print Page | Close Window

What’s it worth?

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194206
Printed Date: 27 May 2024 at 1:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: What’s it worth?
Posted By: AC720Man
Subject: What’s it worth?
Date Posted: 22 Mar 2023 at 8:27pm
Friend has a really nice SC 3 bottom plow for sale. I need to verify but I think it’s 16” bottoms. What are they bringing these days?

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD



Replies:
Posted By: Tracy Martin TN
Date Posted: 22 Mar 2023 at 8:43pm
Really depends on model, condition and location. JMHO, Tracy

-------------
No greater gift than healthy grandkids!


Posted By: AC720Man
Date Posted: 22 Mar 2023 at 8:58pm
Its in really nice condition, ready to plow ground. Not sure of model, will try to find out. He had it for his D17

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: IBWD MIke
Date Posted: 23 Mar 2023 at 10:00am
Well, a 63 would be worth more than a 53. A 73 more than either. No idea what the market is like in your part of the country. I have multiples of each of those models, really like the 73 but it is kind of heavy on a 45.

A good one with nice wear parts, that's really important, should be worth $300. Might take awhile to find a buyer though.

People know I have a 'thing' for plows. I get tips and go look at quite a few. Have so many now that I don't even talk price if they aren't top-drawer. No point insulting someone for something I really don't need anyway.

I sometimes think AC sold at least one 53 plow with every WD and 45 that went out the door! Seem to be everywhere around here. Two bottoms are much less common, here anyway.


Posted By: AC720Man
Date Posted: 23 Mar 2023 at 8:57pm
It was on a D17 previously but I haven’t been by recently to see if I can figure out what model it is. Will try to get by there to take a few pics.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: 200Tom1
Date Posted: 25 Mar 2023 at 3:52pm
Auctions around here, used to be big Allis country, they bring $75.00 to 125.00 each. I bought a 4x16 3 point for $100.00 2 months ago. And a 3 point with tail wheel and depth wheel with cylinder for $200.00. Both are good plows.


Posted By: IBWD MIke
Date Posted: 26 Mar 2023 at 9:38am
A few more random thoughts on plow values; Slat bottoms, good ones  add to the value some but not tons. Bad ones pretty much bring them down to scrap price. If the slats are broken or just worn out it seems to follow that the rest of the plow is pretty much junk. They have probably sat outside and the adjustments are all frozen.

The interesting thing about slat bottom plows to me is that I've never seen an Oliver plow with them. I know they were available, seen them in manuals, just never seen one in person. Have seen plenty of Orange ones, have three. See quite a few Red ones and some of the other green. Of the three I have, one really nice one, one that fits my other category and oddly enough one kind of in between.


Posted By: DrAllis
Date Posted: 26 Mar 2023 at 12:10pm
Dad and Uncle Bob had 70 series 3 x 16's slat bottoms on WD45's. The theory was the slat 16's didn't pull much harder than 14" regular bottoms, which helped a WD45 out in being able to pull 3 x 16's.


Posted By: AC720Man
Date Posted: 27 Mar 2023 at 8:00pm


-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: AC720Man
Date Posted: 27 Mar 2023 at 8:01pm


-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: AC720Man
Date Posted: 27 Mar 2023 at 8:09pm
Finally went over to take a look in his dark building and was disappointed to find out that the coulters are not with the plow. He actually bought it without the coulters as the gentleman could not find them. A decal has a part number 375 14 Bottom so I’m assuming it’s 14” instead of the 16” I guessed. It’s a spring trip plow. Has the Allis Chalmers decal on the side but no model number.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: AC720Man
Date Posted: 27 Mar 2023 at 9:51pm
80 series?

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD


Posted By: VaAllis1990
Date Posted: 27 Mar 2023 at 9:55pm
Yes it would be a model 83 plow


Posted By: AC720Man
Date Posted: 27 Mar 2023 at 10:01pm
Thanks

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net