Construction and other equipment - Looking for a push blade for HD-6:

Print Page | Close Window

Looking for a push blade for HD-6:

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=194129
Printed Date: 31 Oct 2025 at 12:01am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Looking for a push blade for HD-6:

Posted By: Codger
Subject: Looking for a push blade for HD-6:
Date Posted: 17 Mar 2023 at 7:51pm

I can rebuild the original but it is both thin on the moldboard, and the structure. Told the owner I would look around for a used unit for him. Never heard back from the gent offering up an HD-6EP so assuming that is not an option any longer. Going to allow a 30 day window to find a donor before breaking into the original for repairs.

Leads appreciated.

Thanks,

-------------
That's All Folks!

Replies:

Posted By: Gary
Date Posted: 18 Mar 2023 at 10:15am

Probably could have made use of this! $550

https://www.marketbook.ca/listings/construction-equipment/auction-results/219023749/allis-chalmers-hd6" rel="nofollow - https://www.marketbook.ca/listings/construction-equipment/auction-results/219023749/allis-chalmers-hd6

Posted By: DMiller
Date Posted: 18 Mar 2023 at 11:00am

Chartrand in Redbud was last holdout for close Allis Parts but were fast eliminating much of those to scrap, MAYBE Zimmerman in Versailles MO may have something.

Posted By: Codger
Date Posted: 18 Mar 2023 at 1:13pm

Thanks guys, I'll do some research into both places to see what is available. Tractor appears to be nice but years of cleaning feed lots has taken it's toll on the blade and supporting framework.

-------------
That's All Folks!