Farm Equipment - Axle spacing required to run turf tires

Print Page | Close Window

Axle spacing required to run turf tires

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193946
Printed Date: 23 Sep 2025 at 3:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Axle spacing required to run turf tires

Posted By: Arcs and Sparks
Subject: Axle spacing required to run turf tires
Date Posted: 08 Mar 2023 at 5:20pm

In order to use 18.4/16.1s on the front of a 7000 series how many holes must the front axle be extended outward to ensure there is no interference with the frame rails when in a full turn or when the axle oscillates in a turn? I'd also like to know if that is different when the tire size is dropped to 16.5/16.1. There is an option shown to have a secondary factory spin on fuel filter c/w an electric fuel lift pump mounted external to the right hand frame rail approximately below the glass fuel filter. Would anyone have a photo of their tractor with that set up as a factory option. Just curious how the fuel lines were routed. Based on the mounting location it must also impact turning interference considerations. Any help is appreciated.

Replies:

Posted By: DrAllis
Date Posted: 08 Mar 2023 at 8:41pm

I remember 7080's having those tires and the axle was completely narrow.

Posted By: Lynn Marshall
Date Posted: 09 Mar 2023 at 7:52am

All of that extra fuel system junk on the later tractors was mounted on the inside of the frame rail.