645 payloader rim
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193578
Printed Date: 29 Apr 2024 at 6:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 645 payloader rim
Posted By: darrel in ND
Subject: 645 payloader rim
Date Posted: 17 Feb 2023 at 7:19pm
| So, been working on the 645 payloader, trying to get er going again. Before the engine blew, one tire had a slow leak, so since it's been down the tire went flat. We did block up the payloader to keep the tire off the ground. Now that we are working on getting it going again, we took the tire to a tire shop to get it fixed. They came back to us with saying that the back bead seat band is warped, so they don't think that it'll hold air, and also the lock ring is sprung out of shape, so they don't trust it. This is what they called a five piece rim, and takes a 25 inch tire. Thought that the tire shop would be able to head me in the right direction to maybe get these two parts new, but they couldn't. About all they said was that it wasn't an allis chalmers specific rim, most likely made by another company, for many different brands of payloaders. Wondering if anyone here has any insight for me on it. I haven't really tried anywhere yet, like minn parr, or any place for used. Thanks, Darrel |
Replies:
Posted By: Gary
Date Posted: 19 Feb 2023 at 7:03am
|
FYI an interesting article about the Allis 645 Wheel Loader G https://contractormag.co.nz/contractor/645-loader/" rel="nofollow - https://contractormag.co.nz/contractor/645-loader/ |
Posted By: darrel in ND
Date Posted: 19 Feb 2023 at 9:38am
|
Very interesting, Gary. Thank you for sharing that! Darrel |
Posted By: SteveM C/IL
Date Posted: 19 Feb 2023 at 11:36am
| You will have to get same bolt count,bolt circle and offset. Sure they are out there but finding could be a trick.Seen JD that had less lugs but the rest the same. Case is close.... |
Posted By: darrel in ND
Date Posted: 20 Feb 2023 at 5:12am
|
I really don't need the whole rim; just the inner bead seat ring and the locking ring Darrel |
Posted By: truckerfarmer
Date Posted: 20 Feb 2023 at 6:35am
|
Try General Gear. They are a salvage yard in Idaho.. Just went and looked on their website. They have a 645-B parts machine in the yard. ------------- Looking at the past to see the future. '53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer Duct tape.... Can't fix stupidity. But will muffle the sound of it! |
Posted By: darrel in ND
Date Posted: 20 Feb 2023 at 4:04pm
Thanks. Was just searching salvage yards; wasn't sure where to start. Now I know. Darrel |
truckerfarmer wrote:Posted By: Amos
Date Posted: 04 Mar 2023 at 4:02pm
| It is the same rim used currently by Komatsu on some models i had to get one for my 645 and that is what the tire shop told me, the need the bolt circle measurement and the size of the pilot hole, when they searched those two dimensions the first rim they came up with had the same back set a mine. |
Posted By: darrel in ND
Date Posted: 08 Mar 2023 at 8:59pm
| That's good to know, Amos. I haven't had any luck yet, general gear only had one of the pieces that I need. But just the other day I was looking through a local online classifieds site, and seen someone selling parts off a Komatsu loader. Ad said that he had two rims left, were 20 X 25, like I need. I saved the ad, because the thought kept going through my head, "I wonder how close to the same that would be?" Thanks, Darrel |
Posted By: 200Tom1
Date Posted: 10 Mar 2023 at 9:33pm
| Darrel, do you have a cat dealership near you. They have a large salvage lot close to Minneapolis. Take your parts to them and ask. I got a lot of loader rims and used tires off them when I had my tire shop. Usually got the parts the next day or so. |
Posted By: Hyperpack
Date Posted: 27 May 2023 at 11:34am
| Do You still need rim parts for Your loader? |