Farm Equipment - Wc rear axle shaft seals

Print Page | Close Window

Wc rear axle shaft seals

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193537
Printed Date: 01 Apr 2026 at 10:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Wc rear axle shaft seals

Posted By: MaddMatt1969
Subject: Wc rear axle shaft seals
Date Posted: 15 Feb 2023 at 6:09pm

Anyone know where I can get them ? The original is the the 2 pc seal that goes in a 1940 WC

Replies:

Posted By: T Hunter
Date Posted: 15 Feb 2023 at 6:57pm

I believe the national seal number is 6150. I do not know if its avaliable. But.... I take the seal out of the intermediate housing. Be carefull not to distort it and use a Napa Chicago Rawhide cr19229. Then reinstall the assembly back into the axle housing. I've doe a dozen tractors this way with no fails.

Posted By: PaulB
Date Posted: 15 Feb 2023 at 7:12pm

I have some NOS ones that are for the WC/WF tractors. These are the ones that go just outside if the differential. Some have a very large OD and others look more like a normal seal. What id the number on the ones you want to match? Or tell me the OD.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: MaddMatt1969
Date Posted: 15 Feb 2023 at 7:16pm

Yes it is a 6150 I just ordered 2 new ones thank you for the info .

Posted By: MaddMatt1969
Date Posted: 15 Feb 2023 at 7:20pm

Well if the ones that T Hunter told me about don’t work I will get back with you the outer of the whole assembly is 4.257”od 1.937”id