5015 4 x 4 Barn find
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=193267
Printed Date: 29 Apr 2024 at 12:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 5015 4 x 4 Barn find
Posted By: Fred in Pa
Subject: 5015 4 x 4 Barn find
Date Posted: 03 Feb 2023 at 11:48am
Has a trans problem . Going to get started so i can check Hyd's , make sure front PTO and mower run . Then decide on how i will go about parting out or sell as a whole unit .Guy bought it in 80's .used up to 5 years ago. only mowed with it .1880 hours      ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Replies:
Posted By: injpumpEd
Date Posted: 03 Feb 2023 at 2:10pm
|
Ultra rare orchard model? lol! ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: allis1221G
Date Posted: 03 Feb 2023 at 2:21pm
| I would be interested in Fred. |
Posted By: Fred in Pa
Date Posted: 03 Feb 2023 at 3:02pm
|
Guy told me they mowed around Raspberries and hillsides .He has a like new looking 5015 2 W/D with a 3 point mower .NOT for Sale ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: AC720Man
Date Posted: 03 Feb 2023 at 9:40pm
|
Fred, I gotta say that’s a new one I’ve never seen. Kinda neat additional fender flares. At those hours, she may need some head work. My brother in law had one and at 1,200 hours it needed head work. Good little tractor and I almost purchased it with 1,500 hrs on it. Good mowing tractor, but parts are haaaaard to come by. Electric clutch up front was difficult for him to come by but he eventually found one. Sold it shortly after. His wasn’t a 4x4 though. Neat find ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: Daehler
Date Posted: 03 Feb 2023 at 9:57pm
I wish i had that rops on mine. Picked it up this fall with 750 hrs on it. I wasn't going to turn it down. ------------- 8070FWA,7080 BlackBelly, 7045,2 200s,D19,D17,G, WD,45,UC,7 AC mowers and lots more! "IT TAKES 3 JD's TO OUT DO AN ALLIS, 2 TO MATCH IT IN THE FIELD AND 1 FOR PARTS!" |
Posted By: Fred in Pa
Date Posted: 04 Feb 2023 at 1:49pm
|
One tractor at 1200 hours dose not make all them bad with these hours ,abuse is a big factor at any hours .Been around these for years and others with this engine seen a lot of hours with no problems ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: Steve in NJ
Date Posted: 05 Feb 2023 at 7:24pm
|
First time I seen a Tractor with skirts! Foxcraft make them?  Pretty cool!Steve@B&B ------------- 39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife |