Hydraulic filter
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=192321
Printed Date: 04 Apr 2026 at 2:44pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Hydraulic filter
Posted By: INV3RSE
Subject: Hydraulic filter
Date Posted: 12 Dec 2022 at 4:41am
|
I’m looking for a hydraulic filter for my housing. Picture of housing and filter below It gives part number but can’t find anything online, can anyone help? Thanks 🙏 
|
Replies:
Posted By: jaybmiller
Date Posted: 12 Dec 2022 at 6:12am
|
dang Google failed me !! Can you post WHAT it's mounted on ? Thanks jay ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Jim.ME
Date Posted: 12 Dec 2022 at 7:08am
|
I am thinking it is for an ED40 since the page shows it is for (Serial ED 4935 & up) and his location shows as Cornwall. I am wondering if that is a filter assembly that was built and in use in the UK back in those years. You might try a shop that deals in industrial hydraulics to see if they recognize it, or a similar one. Are there any markings on the housing that might give a clue to a manufacturer, if it was supplied to Allis by a vendor? Using the application finder on the WIX site it shows 51420 as the hydraulic filter for an ED40 with the Ricardo L4 2.3L diesel engine. However, it does not appear to have the threaded post shown on the filter in the picture.
|
Posted By: INV3RSE
Date Posted: 12 Dec 2022 at 7:09am
| It’s just before the hydraulic pump at the front of the tractor, ED40. I will post a picture of the whole system from the catalog when I’m home |
Posted By: MACK
Date Posted: 12 Dec 2022 at 7:22am
| Looks like hydro filter on early L Gleaner combine. MACK |