D10-12 radiator?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=191033
Printed Date: 05 Oct 2025 at 12:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D10-12 radiator?
Posted By: Tracy Martin TN
Subject: D10-12 radiator?
Date Posted: 02 Oct 2022 at 9:44pm
Has anyone had any luck with the new reproduction radiators for a D10-12? I am not sure there is a radiator repair shop open around here anymore. Thanks, Tracy
-------------
No greater gift than healthy grandkids!
|
Replies:
Posted By: Aaron W in NC
Date Posted: 03 Oct 2022 at 9:17am
|
I replaced the radiator in my 1965 D10 with an aftermarket I think I got it from Amazon. It works well, fit was ok, had to tweek the sheet metal a little to get it to fit. Cost to recore the original in my area was way to expensive.
|
Posted By: Larry in NC
Date Posted: 03 Oct 2022 at 9:43am
|
The grill shell will not fit over some of the aftermarket ones that are advertised to fit B C CA D10 D12. Some are sold a OEM quality, but cost more. https://www.ebay.com/itm/284299843570?hash=item42319757f2:g:MikAAOSwVbliF9hY&amdata=enc%3AAQAHAAAAsK1o%2BMOc%2FB0nOZ2dFn5wcNP7Y3iXyFHyGJEHzBf51%2BmzfKgyTk0Pq3vBf28OMSnr5ONOOVn8%2FG9ca%2FJUD97ZSdMzvaCcYZzmQJypfwndLaj7PNrUqkLtD9vaSltj5EX8CNsDxmb3FizkabhcZLCVLqMzNGTp%2FsVNtnYUg%2F4PxPs4bQVclI1%2Fr8o4hi4RdojHf24A4dE%2F6SYo0cvbIJ4iAA9pIN2xT11lBlLBPq6QjH5Y%7Ctkp%3ABk9SR_SKzOTzYA" rel="nofollow - https://www.ebay.com/itm/284299843570?hash=item42319757f2:g:MikAAOSwVbliF9hY&amdata=enc%3AAQAHAAAAsK1o%2BMOc%2FB0nOZ2dFn5wcNP7Y3iXyFHyGJEHzBf51%2BmzfKgyTk0Pq3vBf28OMSnr5ONOOVn8%2FG9ca%2FJUD97ZSdMzvaCcYZzmQJypfwndLaj7PNrUqkLtD9vaSltj5EX8CNsDxmb3FizkabhcZLCVLqMzNGTp%2FsVNtnYUg%2F4PxPs4bQVclI1%2Fr8o4hi4RdojHf24A4dE%2F6SYo0cvbIJ4iAA9pIN2xT11lBlLBPq6QjH5Y%7Ctkp%3ABk9SR_SKzOTzYA
|
Posted By: Allis dave
Date Posted: 03 Oct 2022 at 10:59am
|
I bought a new one for my WD45 12 years ago. The overflow tube was wrong. I had to cut a slot in the shell to make room. The new one just had a spot on the neck to connect a rubber hose to instead of the original smaller steel line. So pay attention to that.
|
Posted By: Tracy Martin TN
Date Posted: 03 Oct 2022 at 7:02pm
I will try to get mine fixed. Called a couple of places said they could re-core it. We will see when I get time to get it off. Thanks, Tracy
-------------
No greater gift than healthy grandkids!
|
Posted By: Rogers
Date Posted: 03 Oct 2022 at 8:27pm
I had a D15 radiator recored by Rock Valley tractor years ago.
I bought an aftermarket radiator for my D14, and I had to cut the fan opening. It was diamond shaped not round.
Not much help on a D10 or D12 other than I think you are hit and miss on a reproduction
I'd go to YTMAG or Steiner's If I bought one. I tried to find the best deal on my D14, and it wasn't a deal. It did work though.
-------------
Think for yourself and be your own expert. Be willing to change your mind; however, willingness to change your mind doesn’t mean that you will. Blindly following any path is the pinnacle of insanity.
|
|