MF 1725GC opinions
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=190642
Printed Date: 22 Jun 2025 at 1:22am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: MF 1725GC opinions
Posted By: thendrix
Subject: MF 1725GC opinions
Date Posted: 13 Sep 2022 at 9:47am
|
I'm looking to trade an LS M125. Just not real happy with the LS. Had several smaller issues and I'm just kinda tired of it. Looked at Kubota and they're very expensive. So now I'm looking at the Massey 1725 and just wandering if anybody has experience with them. My biggest question is the Iseki engine. I've never had any experience with them. The LS has a Yanmar, which was a big selling point. Never had any trouble with the engine. Mostly it's the mower deck and the deck lift mechanisms that I'm unhappy with. Any thoughts on the Massey? Is it made by Massey or by someone else with red plastic? ------------- "Farming is a business that makes a Las Vegas craps table look like a regular paycheck" Ronald Reagan |
Replies:
Posted By: WF owner
Date Posted: 13 Sep 2022 at 12:32pm
|
I have a 2011 Massey Ferguson GC2400 with the (3 cylinder) Iseki engine. I also have a 60" deck and last year I bought a front mount snowblower. (I had a 3 point hitch blower before that). It gets used for a lot of things that I should be using a lot bigger tractor to do. As far as I know, Massey Ferguson does make their smaller tractors.
I have about 850 hours on it. In the 12 years I have had it, I have had very few problems. The weld on the drive shaft (from the engine to the hydraulic pump) broke on one yoke. I aligned it as straight as possible and rewelded it. No problem since. I had to replace the glow plugs a few years ago, but I am thinking that was my fault. The battery was weak and I was using the booster/charger in cold weather while using the blow plugs. A new battery and new glow plugs and no more problems. I would buy definitely another Massey Ferguson again!
|
Posted By: AC720Man
Date Posted: 13 Sep 2022 at 7:22pm
|
I looked at the MF 26hp compact but I could not get a belly mower for it. Went to Mahindra dealer and bought their 26 hp compact 4WD. 60” belly mower, loader, backhoe. Very pleased and very little plastic parts. Hood, fenders are all metal. Mitsubishi diesel. I think they have a 7 year warranty now, mine was 5years. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: nickia
Date Posted: 13 Sep 2022 at 8:21pm
| good little tractors like ours a little cold blooded in the winter but will work all day like it very much |
Posted By: thendrix
Date Posted: 14 Sep 2022 at 5:42am
|
Thanks fellas. Hoping to go have a look at one maybe next week ------------- "Farming is a business that makes a Las Vegas craps table look like a regular paycheck" Ronald Reagan |
Posted By: WF owner
Date Posted: 14 Sep 2022 at 5:58am
|
I have a friend that has an older Kubota and another that has a brand new Mahindra. I don't like either of their pedals (to go forward or backward). I really like the Massey Ferguson side by side pedals. They are much are natural and comfortable. It doesn't sound like much, but when you are on the tractor for 4-5 hours mowing every week, it makes a difference!
|
Posted By: Tom59
Date Posted: 14 Sep 2022 at 7:30am
| The Massey Ferguson GC Series of subcompact tractors used to be realizable price, cheaper than other brands. |
Posted By: WF owner
Date Posted: 14 Sep 2022 at 12:19pm
When I bought my GC2400 in 2011, the tractor/loader was $9999. The 60" deck was $1600. I got them to change to ag (bar type) tires and throw in an and install an engine heater for $10,600. At the same time, our local dealer quoted me $17,300 for a comparable John Deere and the Kubota dealer was $15,500. The Kubota dealer told me he couldn't come close to the Massey Ferguson price and he said not to be afraid of the Massey. He also said that he didn't like to knock anyone's product, but advised me to stay clear of the New Holland.
|
Tom59 wrote:Posted By: cwhit
Date Posted: 14 Sep 2022 at 8:30pm
| Bought ours 2yrs ago. Has 169 hrs. On it when I put it in the shed this evening. Wife runs it most of the time and loves it. Like WF said,I liked the 2 pedal over the 1 pedal. Has a metal hood and fenders and it’s nice to operate. You won’t be disappointed. If you do get one , move the rear warning lights to the inside of the roll bar. |
Posted By: thendrix
Date Posted: 15 Sep 2022 at 6:15am
|
Probably going to go look at one next week. Cwhit, that sounds like the "toolbox" on our LS. Little plastic toolbox mounted on the outside of the ROPS. My brother and Mama's mailbox quickly took care of that though. Think it lasted about 3 or 4 hours ------------- "Farming is a business that makes a Las Vegas craps table look like a regular paycheck" Ronald Reagan |
Posted By: WF owner
Date Posted: 15 Sep 2022 at 11:39am
|
I moved my rear lights, too. If you get close to trees, limbs or anything, there is very little protection from breaking them and they are very expensive !!! Mine have been glued back together. Another tip if you buy a mower deck is to grease the wheels often. They are $130 x four for a new set!
|
Posted By: thendrix
Date Posted: 15 Sep 2022 at 7:27pm
|
There will definitely have to be a mower deck. That's what we use and my mama uses. The deck is the downfall to the LS. The spindle bearings aren't sealed so when you grease them you push all the grass and dirt into the bearings. They don't last long when that happens ------------- "Farming is a business that makes a Las Vegas craps table look like a regular paycheck" Ronald Reagan |
Posted By: WF owner
Date Posted: 18 Sep 2022 at 3:13pm
|
I know it's bad luck to say this, but I have had zero spindle problems with my 60" deck. We have acquired more yard over the years, plus I now mow two vacant lots adjacent to me, so I am up to almost 5 acres that I mow weekly. Other than blades and a lot of grease, I have done nothing to my deck. The front (caster) wheel in the middle is pretty well worn and I will replace it at the end of the year, but no other problems.
Blades are only available from the dealer and very heavy. They are quite expensive at about $110/ set, but I get two full years out of a set. |