Farm Equipment - Char-Lynn torque generator

Print Page | Close Window

Char-Lynn torque generator

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=190205
Printed Date: 17 Dec 2025 at 11:47pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Char-Lynn torque generator

Posted By: waldersha
Subject: Char-Lynn torque generator
Date Posted: 21 Aug 2022 at 4:01am

Putting together my WD45. Have a char-lynn power steering setup, but it has been unhooked. It is a 100 series torque generator, I believe 101. Can someone tell me which port is in and which out? I don’t see any indication on the port block or the body itself and don’t want to hook it up backwards.

Replies:

Posted By: IBWD MIke
Date Posted: 21 Aug 2022 at 7:45am

https://www.allischalmers.com/forum/wd45-char-lynn-power-steering_topic171455_page2.html?KW=steering" rel="nofollow - https://www.allischalmers.com/forum/wd45-char-lynn-power-steering_topic171455_page2.html?KW=steering

This is a link to the power steering thread I did a couple of years ago. In the second to last picture on the second page you can see the pressure line in the top port. If your torque generator is 'clocked' the same this will work for you.

Posted By: waldersha
Date Posted: 21 Aug 2022 at 2:05pm

Thanks for your response. Mine is set up slightly different with the generator on the bottom side of the bracket, but was able to use your pic and get it installed. Much appreciated!