Baler Serial Number Location
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189919
Printed Date: 14 Jun 2025 at 8:01pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Baler Serial Number Location
Posted By: Randy_Larson
Subject: Baler Serial Number Location
Date Posted: 06 Aug 2022 at 10:44am
|
We are looking at a baler and don't know if it is a 303 or 302. Can you let me know where the serial numbers are located. Your time is appreciated. |
Replies:
Posted By: Randy_Larson
Date Posted: 06 Aug 2022 at 10:49am
| I am sorry the model number location....the serial number is 556881 0805 |
Posted By: Alex09(WI)
Date Posted: 06 Aug 2022 at 11:24am
|
303 should have 3 u-joints in the pto driveline, 302 has 2. The serial # should be on the top frame in front of the drivers side of the pickup. ------------- www.awtractor.com A&W TRACTOR 920-598-1287 KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY |
Posted By: im4racin
Date Posted: 06 Aug 2022 at 2:01pm
| or riveted to the front face to the left (when viewing from the front) from the flywheel. It won’t give model tho. |
Posted By: DSeries4
Date Posted: 06 Aug 2022 at 8:35pm
Mine is stamped. It does not show the model number (I don't think), I will double check tomorrow. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
im4racin wrote:Posted By: im4racin
Date Posted: 06 Aug 2022 at 9:35pm
| I have balers with it in one or the other places. Neither have model number. |
Posted By: DrAllis
Date Posted: 06 Aug 2022 at 9:59pm
| 302 has short tongue with two U-joints. 303 has LONG tongue with three u-joints. |
Posted By: Randy_Larson
Date Posted: 07 Aug 2022 at 12:57pm
|
Thank you to everyone who replied! Two u-joints.....302. Thanks again for your time and assistance! |