disk?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189829
Printed Date: 06 Sep 2025 at 6:05pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: disk?
Posted By: SteveMaskey(MO)
Subject: disk?
Date Posted: 01 Aug 2022 at 8:31pm
Is this a AC disk
|
Replies:
Posted By: Gary
Date Posted: 02 Aug 2022 at 7:11am
|
|
Posted By: Allis dave
Date Posted: 02 Aug 2022 at 7:13am
| I have a book for an Allis 9a. It's similar but the 9a has a tube frame that goes up high then back down again to hook the 2 gangs together. |
Posted By: ac fleet
Date Posted: 02 Aug 2022 at 5:47pm
|
are there any markings on the castings? even the old ac disks had it stamped or molded in the cast iron. might be worn down and hard to see so you have to rub and look close. ------------- http://machinebuildersnetwork.com/ |
Posted By: DiyDave
Date Posted: 02 Aug 2022 at 5:57pm
Look at the spools(bearings), specifically the female half. Usually there is a part number stamped there... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: SteveMaskey(MO)
Date Posted: 03 Aug 2022 at 6:36pm
looked all over could not find any numbers part or casting. looks like the bearing block is red
|
Posted By: steve(ill)
Date Posted: 03 Aug 2022 at 8:33pm
looks a lot like this ... ------------- Like them all, but love the "B"s. |