Print Page | Close Window

620

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189371
Printed Date: 02 May 2024 at 1:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 620
Posted By: DaveWisc.
Subject: 620
Date Posted: 08 Jul 2022 at 3:27pm
Can a PTO be put on the back of this without a lot of work



Replies:
Posted By: Orangeisgreat190
Date Posted: 08 Jul 2022 at 8:46pm
Hi Dave,
Most I have seen had the shaft sticking out the back.  For it to work you need to have the rear pto clutch and shaft that goes forward and attaches to the engine.  There is a hub under the cover between your legs that the clutch attaches to.


Posted By: DSeries4
Date Posted: 08 Jul 2022 at 10:34pm
If you have all of the parts, it should not be too hard.  Just remember that the PTO for these tractors spin at 2000 rpm - a far cry from the standard 540.



-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net