Flail hammers…off topic
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=189040
Printed Date: 16 May 2024 at 2:37am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Flail hammers…off topic
Posted By: captaindana
Subject: Flail hammers…off topic
Date Posted: 22 Jun 2022 at 11:58am
|
I need replacement flail hammers for my Betstco AGL 165 trimmer. It’s sort of off topic but I do have it mounted on my 170. The hammers are a little bit more than 3 inch wide at the wide part half-inch bolt 3 1/2 inches overall length everybody in the world seems to be out of them does anyone have any ideas or sources? Thanks. Dana ------------- Blue Skies and Tail Winds Dana |
Replies:
Posted By: steve(ill)
Date Posted: 22 Jun 2022 at 4:00pm
did you try the Factory ?... Web site says they sell "PARTS", but it appears you have to call the phone.. They dont list PARTS on the internet. ------------- Like them all, but love the "B"s. |
Posted By: jaybmiller
Date Posted: 22 Jun 2022 at 4:53pm
|
if dull, can you reverse them ??? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: captaindana
Date Posted: 22 Jun 2022 at 5:20pm
|
The factory has not had parts since the middle of Covid and everyone else that has that size apparently there are none to be had. No they are non-reversible and I have a few that have broken in half and yes I sharpen them. ------------- Blue Skies and Tail Winds Dana |
Posted By: DiyDave
Date Posted: 22 Jun 2022 at 6:06pm
There's a company that is generally at the York PA farmshow, each year that sells tiller tines and flail mower blades, can't remember the name for the life of me, right now. If you contact Lee publishing, I think they are in NY, they put on that show, and several others, in the mid atlantic, they may be able to get you the name. I think the company is a father/daughter outfit, out of california, has tillage parts in the name...
For your viewing enjoyment: http://youtu.be/OZqMLjmDMQY" rel="nofollow - http://youtu.be/OZqMLjmDMQY ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: fjdrill
Date Posted: 22 Jun 2022 at 8:18pm
| I bought some from a guy in NY for a Turner/Bomford boom flail mower. The guy has some on eBay (brian1017). You have to do a complete change out to keep it in balance. I just bought the hammers and u shackle looking thingies. Used hard bolts and washers for spacers |
Posted By: steve(ill)
Date Posted: 22 Jun 2022 at 8:39pm
|
there are SEVERAL Variations of blades on AMAZON or Ebay..... none say they are for the Betstco mower.... like fjdrill, i was wondering if a "retrofit" was possible... ------------- Like them all, but love the "B"s. |
Posted By: steve(ill)
Date Posted: 22 Jun 2022 at 8:44pm
options......  ------------- Like them all, but love the "B"s. |
Posted By: truckerfarmer
Date Posted: 23 Jun 2022 at 9:31pm
|
Check with Shoup. Look a lot like JD knives. ------------- Looking at the past to see the future. '53 WD, '53 WD45, WD snap coupler field cultivator, #53 plow,'53 HD5B dozer Duct tape.... Can't fix stupidity. But will muffle the sound of it! |
Posted By: captaindana
Date Posted: 24 Jun 2022 at 4:42am
|
Shout says no, every eBay seller says no. So none to be had. Mine are 3 1/8 wide at wide part and 3 1/2 over all length. For right now I see none, Chinese supplier says 2 more months. I’ll be done trimming soon and wil have to wait.They said 2 more months back in January also lol. ------------- Blue Skies and Tail Winds Dana |