Agco Parts book
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=188066
Printed Date: 19 Jun 2025 at 11:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Agco Parts book
Posted By: AC720Man
Subject: Agco Parts book
Date Posted: 04 May 2022 at 9:45pm
|
Not sure why I can’t do a search on here for this topic and yet I know it was discussed. Can’t get to the guest user or Allis Chalmers, Agco Allis site. I know there was a change that effected searches, trying to look up stuff for my D17. Help appreciated ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Replies:
Posted By: SteveM C/IL
Date Posted: 04 May 2022 at 9:57pm
| if you want old site ,type agcopartsbooks.com. Scroll down and click agcopartsbooks.com. |
Posted By: AaronSEIA
Date Posted: 05 May 2022 at 5:45am
|
https://parts.agcocorp.com/ " rel="nofollow - https://parts.agcocorp.com Click search by parts book. Its slightly different than it was, but still a pretty good site. Edit. Something in the forum software is adding some hidden stuff and the link doesn't directly work. Click my link, then the Go To Home Page. That'll get you there. AaronSEIA
|
Posted By: AC720Man
Date Posted: 05 May 2022 at 6:13am
|
Thank you both for replying, I will take a look. ------------- 1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD |
Posted By: ac45dave
Date Posted: 05 May 2022 at 7:55am
|
It appears the site is down for maintenance. ------------- 54 wd-45gas ; 56 wd-45d N/F w/fact p/s ; 63 d-17 sIII N/F gas ; 60 D14 N/F ; 67 d-17 sIV N/F gas ; 63D15 sII W/F; 39rc#667 ; 2021 massey 4710 fwa ; gravely 2 wheel tractors |
Posted By: PaulB
Date Posted: 05 May 2022 at 8:58am
|
Just get a hard copy parts book ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Joe(TX)
Date Posted: 05 May 2022 at 9:08am
|
I use the old site. The new site does not have as good of descriptions as the old one. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: SteveM C/IL
Date Posted: 06 May 2022 at 9:32pm
| New site gives me pricing....old sight when not needed |
Posted By: ac160
Date Posted: 07 May 2022 at 6:45am
|
I wonder if it is for maintenance or because AGCO got hit with ransomware according to the news yesterday. |
Posted By: wjohn
Date Posted: 07 May 2022 at 7:58am
Agreed, it's really nice to know if A. the part I'm looking for is still available anymore B. if it costs $30 or $300 and C. if it's in stock at your dealer. I think it's been a great upgrade. Site is working fine for me this morning. ------------- 1939 B, 1940 B, 1941 WC, 1951 WD, 1952 CA, 1956 WD-45 |
SteveM C/IL wrote:Posted By: tbran
Date Posted: 07 May 2022 at 10:03pm
|
AGCO was hit with ransomware attack by the Russian terrorist it seems. All systems were down Thurs to Fri aft when they got E commerce to work. Most systems are still down. Rumor is FBI is assisting and tracing. Serious but the IT guys at Agco are working around the clock to get everything back up and running. Everyone is pitching in and trying to keep all the farmers up and running ... more later. ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: Ron(AB)
Date Posted: 10 May 2022 at 8:40am
|
Is the parts book site up and running? ------------- 405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk |
Posted By: ac160
Date Posted: 10 May 2022 at 9:34am
| It does appear some of it is working. |
Posted By: ryan(IN)
Date Posted: 10 May 2022 at 12:01pm
|
Parts books are up and working now. But ordering at the dealer level is not fully operational. They have a process we are using to order things. But no guarantee when it will ship. We cannot see availability at the warehouses either. If you are calling you AGCO dealer for parts, please be patient with us we are trying our best to get what you need. ------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |
Posted By: tbran
Date Posted: 11 May 2022 at 10:56pm
|
Ditto Ryan, it is a buggar bear.... we can now down load a spread sheet on the dealer portal and send it - they will print and pull the parts - hopefully... been down a week - I can only imagine the back log of parts orders... we usually send 4 or 5 stock orders a week... danm Russians... ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: ryan(IN)
Date Posted: 12 May 2022 at 5:44am
It is a bear! Stuff we ordered manually Monday might show up today. ------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |