Unknown levers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187923
Printed Date: 16 Oct 2025 at 6:58am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Unknown levers
Posted By: john2189
Subject: Unknown levers
Date Posted: 28 Apr 2022 at 12:39pm
|
Hi. I got these two levers a right and left with a b I bought. I have no idea what they are for. Anyone know? They are orange, so I assume they are allis chalmers. uploads/227/5CC0A089-5330-475A-B213-A9ED5BF815F3.jpeg" rel="nofollow - 5CC0A089-5330-475A-B213-A9ED5BF815F3.jpeg ------------- '41 Allis B '45 Allis B '49 Farmall Cub '72 IH Cub |
Replies:
Posted By: steve(ill)
Date Posted: 28 Apr 2022 at 1:20pm
I cant see the photo real clear, but the appear to be Cultivator Lift arms for some ALLIS tractor.  ------------- Like them all, but love the "B"s. |
Posted By: jaybmiller
Date Posted: 28 Apr 2022 at 1:34pm
|
gee I got one of them in my garage too ! ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: john2189
Date Posted: 28 Apr 2022 at 1:49pm
|
Im hoping someone can identify them so I can put them in the classified forum. Hopefully someone can use them I really don’t want to scrap them ------------- '41 Allis B '45 Allis B '49 Farmall Cub '72 IH Cub |
Posted By: PaulB
Date Posted: 28 Apr 2022 at 3:41pm
|
They look more like the WD cultivator levers than the B lever. The B lever has a curve in it. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: steve(ill)
Date Posted: 28 Apr 2022 at 4:10pm
|
john. post a better photo of the TOP and the BOTTOM ends... and maybe the length... to help someone identify. ------------- Like them all, but love the "B"s. |
Posted By: Dakota Dave
Date Posted: 28 Apr 2022 at 11:57pm
| Those are the cultivator depth levers for a C. They attach to the outer end of the rock shaft and ingage the toothed quadrants just outboard of the fenders. Your missing quite a bit of the assembly. They are totaly usless for your B and some parts are welded to the rock shaft. You dont have them either. |
Posted By: john2189
Date Posted: 29 Apr 2022 at 5:58am
|
Thanks they came with on of my Bs. Do they mount to the seat frame? I have no use for them. I’ll see if someone wants them. John ------------- '41 Allis B '45 Allis B '49 Farmall Cub '72 IH Cub |
Posted By: steve(ill)
Date Posted: 29 Apr 2022 at 9:01am
The "rock shaft" that Dave talks about is the round bar about 1.5 inch diameter that sets horizontal behind the seat and is used as the LIFT for some implements.. Here is a You Yube shot of the back of a C tractor. ------------- Like them all, but love the "B"s. |
Posted By: john2189
Date Posted: 29 Apr 2022 at 1:25pm
 The c doesn’t quite look right Hope this is a better picture of them ------------- '41 Allis B '45 Allis B '49 Farmall Cub '72 IH Cub |