sickle sections
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Garden Tractors
Forum Description: A great place to discuss the Simplicity and Allis Chalmers Garden Models
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187794
Printed Date: 09 May 2024 at 1:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: sickle sections
Posted By: only AC orange
Subject: sickle sections
Date Posted: 20 Apr 2022 at 6:48pm
| Looking for sickle sections for AC / Simplicity sickle mower. Any ideas as to where they might be found? Sandy Lake doesn't have! |
Replies:
Posted By: steve(ill)
Date Posted: 20 Apr 2022 at 7:14pm
|
I have a sickle mower on a "B" tractor... What i did was measure the width and depth of each sickle... measure the bolt pattern ( some 2 inch, some 2-1/16 "... etc") .... then i went to the local Farm Store and found similar that would fit. ------------- Like them all, but love the "B"s. |
Posted By: den/southern illinoi
Date Posted: 21 Apr 2022 at 6:55am
|
I would agree with Steve if we are talking about a sickle mower for the large frame tractors (720, etc) but the smaller garden tractor mowers use a smaller section. They are scarce and hard to find. Den ------------- Own 5 720 garden tractors with associated equipment,1 620 garden tractor, 4 wheel 20 2-5015, 5020 and associated equipment and 2 electric forklifts. |
Posted By: steve(ill)
Date Posted: 21 Apr 2022 at 8:54am
Denny is right... i did not mean to imply that the larger sections would fit the garden tractor... just if you had the DIMENSIONS you could match up... these are on AMAZON for example..... i dont know if they fit or not... ------------- Like them all, but love the "B"s. |
Posted By: ryan(IN)
Date Posted: 01 May 2022 at 7:38pm
|
https://www.cuttingcomponents.com/jari-simplicity-ward-replacement-section-102500-2-inch-w-x-2-13-16-inch-h-3-16-inch-hole-on-1-3-8-inch-centers.html " rel="nofollow - https://www.cuttingcomponents.com/jari-simplicity-ward-replacement-section-102500-2-inch-w-x-2-13-16-inch-h-3-16-inch-hole-on-1-3-8-inch-centers.html ; We used these on my brothers sickle bar on his B112 ------------- ryan 1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62 |
Posted By: dawntreader74
Date Posted: 03 May 2022 at 8:38pm
| same as a david bradley mower; sears. |
Posted By: only AC orange
Date Posted: 05 May 2022 at 7:16am
| Ryan,In thanks for suggestion. I contacted Webbs cutting components yesterday and sections are on the way! |