Farm Equipment - A certain brand clutch?

Print Page | Close Window

A certain brand clutch?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187686
Printed Date: 03 Sep 2025 at 10:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: A certain brand clutch?

Posted By: John m
Subject: A certain brand clutch?
Date Posted: 15 Apr 2022 at 6:32am

Is there a better or certain brand 70261212 drive disc that I should be looking for? I see Alto, A&I, Tribco and some other name brands. There's prices that vary from 45.00 to 80.00 each. That's quite a difference when your replacing all of them. I'd like to get them ordered but figured I better ask before someone says I shouldn't have gotten that brand or I should have gotten this brand. Thanks, John m

Replies:

Posted By: MACK
Date Posted: 15 Apr 2022 at 6:58am

I don't like to split them the second time so I buy the Agco. MACK

Posted By: John m
Date Posted: 15 Apr 2022 at 7:06am

Ha ha, this was the third time cause I forgot the darn gasket first time and now the pd issue. This isn't a one man job as far as I can tell. I don't think I'm up to doing this again. Thanks Mack

Posted By: NEVER green
Date Posted: 15 Apr 2022 at 8:43am

I use Tribco in my 7040 puller, they are kevlar faced so there is less heat, the manufacture guaranteed they wont warp. So far so good, Im sure you would not have the heat issue as I but maybe a better price?

-------------
2-8050 1-7080 6080 D-19 modelE & A 7040 R50

Posted By: AC720Man
Date Posted: 15 Apr 2022 at 9:38pm

I wish Rick was still building clutches, no doubt he would be the one I would suggest. Agco would be my second choice even though they are going to be more expensive.

-------------
1968 B-208, 1976 720 (2 of them)Danco brush hog, single bottom plow,52" snow thrower, belly mower,rear tine tiller, rear blade, front blade, 57"sickle bar,1983 917 hydro, 1968 7hp sno-bee, 1968 190XTD

Posted By: AaronSEIA
Date Posted: 16 Apr 2022 at 6:10am

Maybe Rick will chime in with his thoughts. He also was my first choice.

AaronSEIA

Posted By: DrAllis
Date Posted: 16 Apr 2022 at 6:54am

The clutch discs used in the Power Director clutches are a vendored item. Allis never made them. They are not rebuildable. They are a internal tooth steel disc with a bronze facing poured onto them.