Snap Coupler Release Lever Spring
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187143
Printed Date: 08 May 2024 at 5:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Snap Coupler Release Lever Spring
Posted By: WeisAC2
Subject: Snap Coupler Release Lever Spring
Date Posted: 19 Mar 2022 at 7:43pm
I need some help figuring out where the replacement spring goes for the lever that controls the snap coupler release. The spring has been gone as long as I can remember. The lever hangs out and hangs up on your leg while operating the tractor. The obvious eye that you can see in the picture is for the brake return spring. Is this also where the spring goes for the lever???   |
Replies:
Posted By: DSeries4
Date Posted: 19 Mar 2022 at 8:34pm
|
The spring is no longer available. I have 3 tractors that need it. If you did have the spring, it would attach to the brake rod. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: DiyDave
Date Posted: 19 Mar 2022 at 8:40pm
If you look at the lever, it's bent slightly, too. Common occurrence. When you are bodging up a spring, straighten up the lever, too... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: WeisAC2
Date Posted: 20 Mar 2022 at 6:44am
| Thanks DSeries4 and DIYDave! So the original spring ran from the brake rod to the bracket on the lever where the chain attaches? I'll see if I can come up with something. I appreciate the help. |