Farm Equipment - AC 8010 A/C

Print Page | Close Window

AC 8010 A/C

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=187140
Printed Date: 06 Jun 2025 at 3:15am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC 8010 A/C

Posted By: TimZ(TX)
Subject: AC 8010 A/C
Date Posted: 19 Mar 2022 at 2:49pm

Doing a Sanden compressor conversion on my 8010. Replacing everything, I have become a little stumped on wiring the compressor. The old A6 had a 2 pole plug, the new one has one green wire. I'm using the high pressure switch at the compressor and the the low pressure at the drier. Not sure how to wire from the A/C Switch. is on side of the original plug the hot side? Is it a good idea to put in a relay straight from the battery to the clutch? I'm not the best at electrical stuff. Tim

-------------
2-B's,CA,D15,D17,160,2-185's 8010

Replies:

Posted By: Alvin M
Date Posted: 19 Mar 2022 at 3:02pm

I use the AP Air kit 990-005 Switches mount at the compressor one wire to the first switch then the other wire on the switch goes to the other switch then to the compressor has all you need in the kit