D17 NF wheel pillar hubs
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186417
Printed Date: 22 Aug 2025 at 10:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D17 NF wheel pillar hubs
Posted By: TomYaz
Subject: D17 NF wheel pillar hubs
Date Posted: 13 Feb 2022 at 5:01pm
|
Hello Ladies and Germs. Pictured below is supposedly a narrow front for a D17 I want to overhaul and put on my unit. Was doing some part number research and it appears the hubs do not have the same part number as in my parts catalog. Hub says I think 323904, but the parts catalog is totally different number....need to find out what I got so as to but new internals. Any ideas what this hub is off of? Thanks Tom  ------------- If its not an All-Crop, it all crap! |
Replies:
Posted By: TomYaz
Date Posted: 13 Feb 2022 at 5:15pm
|
That number is 32904...probably just a casting number. My originals have the same hub. 5 bolt. ------------- If its not an All-Crop, it all crap! |
Posted By: FREEDGUY
Date Posted: 13 Feb 2022 at 5:25pm
|
May I ask why a "rebuild" is necessary in your opinion ?? We've got a NF off of a D series that has at least the cream color on the hubs still
 . Sadly , no D series left on the farm though so I'm uncertain which tractor it was on (pretty sure a D17 though). |
Posted By: TomYaz
Date Posted: 13 Feb 2022 at 5:29pm
|
Not really a "rebuild" just a tear down clean up replace if anything needs replaced,repack, repaint. One of them moves real stiff so it needs a repacking for sure. ------------- If its not an All-Crop, it all crap! |
Posted By: TomYaz
Date Posted: 13 Feb 2022 at 5:30pm
|
I need to put my brush hog on it to mow the orchard as the WD45 engine I believe is shot. Wide front on the D17 wont cut it around the trees and rows. ------------- If its not an All-Crop, it all crap! |
Posted By: FREEDGUY
Date Posted: 13 Feb 2022 at 5:36pm
| Thanks Tom, I understand the NF accessibility in your situation . |
Posted By: TomYaz
Date Posted: 13 Feb 2022 at 5:41pm
------------- If its not an All-Crop, it all crap! |