Classifieds - Head for 6080 Needed

Print Page | Close Window

Head for 6080 Needed

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186177
Printed Date: 01 May 2025 at 3:45pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Head for 6080 Needed

Posted By: LeeBottom
Subject: Head for 6080 Needed
Date Posted: 02 Feb 2022 at 3:12pm

Fiat engine. Is later model with front crank support. 6080 not 6060.

433i

Part #74008088

Ours is cracked in four places and shop cannot get to repair of head for three months.

Anybody have anything or a lead on one?

Worst case, does anyone have a known quantity complete engine?

Replies:

Posted By: DougG
Date Posted: 02 Feb 2022 at 3:59pm

Its an Allis Chalmers engine ,, thank you

Posted By: LeeBottom
Date Posted: 02 Feb 2022 at 4:44pm

Why does it have FIAT stamped on it and why do the shops always shy away from it and ask, "Is it one of those FIATs?"

Posted By: DrAllis
Date Posted: 02 Feb 2022 at 7:07pm

The engine doesn't have FIAT written on it anywhere. The bellhousing thru the whole rear end is FIAT and probably does. The tag that you got the 433-I and 74008088 information from says ALLIS-CHALMERS right on it. The engine is essentially the same in the 6060-6070-6080 tractors.

Posted By: SteveM C/IL
Date Posted: 02 Feb 2022 at 11:49pm

The head off an F2-F3 Gleaner would be the same I think since it's the "same" engine (433). Call bone yard. K2 used it also but wasn't aftercooled.

Posted By: steve fischer
Date Posted: 03 Feb 2022 at 8:50am

have head that was repaired and have combine engines