Online Auct results, 01/26/22,
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=186050
Printed Date: 23 Apr 2024 at 4:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Online Auct results, 01/26/22,
Posted By: KJCHRIS
Subject: Online Auct results, 01/26/22,
Date Posted: 27 Jan 2022 at 7:16pm
|
These 3 AC tractors sold Wed at Big Iron Online Auct. All appeared to be nice condition. I did not go look at them. They were all in N E Nebraska. AC 8050 MFWD, @ $46,500. AC 185, 34" rears @ $9,800. AC 185, 28" rears, cab, loader @ $7,800. ------------- AC 200, CAH, AC185D bareback, AC 180D bareback, D17 III, WF. D17 Blackbar grill, NF. D15 SFW. Case 1175 CAH, Bobcat 543B, |
Replies:
Posted By: Ryan Renko
Date Posted: 27 Jan 2022 at 8:08pm
| That 8050 must have been sweet!!! Gotta find pictures. Ryan |
Posted By: victoryallis
Date Posted: 27 Jan 2022 at 11:53pm
|
For $45,000 I’ll sell a nice 8050 and 7580 as a package. ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
Posted By: matador
Date Posted: 28 Jan 2022 at 12:41am
|
Here is the 8050: https://www.bigiron.com/Lots/1982Allis-Chalmers8050MFWDTractor" rel="nofollow - https://www.bigiron.com/Lots/1982Allis-Chalmers8050MFWDTractor I'd say that's one of the nicest I've ever seen ------------- Tractors: Allis WD (x2), Allis 7040, Oliver 1800A Diesel, Case 830 Caseomatic, White 2-105, Massey 1105 | Plus a Gleaner F2, 30' A-C 1300 Cultivator, Flightline bale elevator |
Posted By: SteveM C/IL
Date Posted: 28 Jan 2022 at 9:00am
| You notice Andy Gubbels was sales agent for Big Iron |
Posted By: matador
Date Posted: 28 Jan 2022 at 9:21am
|
No, but I don't know who he is. Should I? The name rings a bell, but I can't place it ------------- Tractors: Allis WD (x2), Allis 7040, Oliver 1800A Diesel, Case 830 Caseomatic, White 2-105, Massey 1105 | Plus a Gleaner F2, 30' A-C 1300 Cultivator, Flightline bale elevator |
Posted By: Acdiesel
Date Posted: 28 Jan 2022 at 10:42am
|
only 236 hours??? the condition of the tractor sure makes it look true. not a bad price, considering what a new tractor cost. ------------- D19 diesel,D17 diesel SER.3 D14 NF,D14 WF, D15 SER.II wf D15 SER.2 DIESEL,D15 ser.II nf D12 SER.I, D10 Ser.II 2-720'S Gmc,caterpillar I'm a pharmacist (farm assist) with a PHD (post hole digger) |
Posted By: SteveM C/IL
Date Posted: 28 Jan 2022 at 1:16pm
| He's a forum member...part of Gubbels Restorations?? |
Posted By: IBWD MIke
Date Posted: 28 Jan 2022 at 2:19pm
That is true but I haven't seen him on in a long time.
|
SteveM C/IL wrote:Posted By: Ryan Renko
Date Posted: 28 Jan 2022 at 6:04pm
| I wonder what the story is that that tractor has such low hours and looks almost new? Ryan |
Posted By: Mikez
Date Posted: 28 Jan 2022 at 7:12pm
|
I’d like to know the story of the owner to. Where’s the correct police. If it’s legit. Be a nice tractor to referee to. Lots of pictures of the repainted rims. It’s nice though. Hard to believe that low hours.
|
Posted By: Tim NH
Date Posted: 28 Jan 2022 at 7:29pm
|
A lot of blue smoke from the exhaust for a low houred tractor. ------------- 1950 WD 1959 D14 1955 WD45 1976 7000 B 207 |
Posted By: bigal121892
Date Posted: 29 Jan 2022 at 8:18am
| Here is what I was told by someone who went and looked at it. This is the second owner, when he bought it, it had a non-working tach with 2300 - 2400 hours. The second owner, (the seller) put a new tach in, and used the tractor about 50 hours a year. Still, it is a really clean tractor. |
Posted By: Mikez
Date Posted: 29 Jan 2022 at 8:51am
| the other thing that made me wonder was the wear marks on side of dash and console. Wouldn’t think 200 hours would have that. But I don’t know |
Posted By: Mikez
Date Posted: 29 Jan 2022 at 1:37pm
| what’s the switch on side of dash just above warning labels |
Posted By: Ron(AB)
Date Posted: 29 Jan 2022 at 6:20pm
|
Mike that is the strobe light switch. ------------- 405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk |
Posted By: Mikez
Date Posted: 29 Jan 2022 at 6:25pm
| oh ok thanks. Nicely done. Was that an mirrors an option of that time period. Or stuff done latter on. |
Posted By: Ron(AB)
Date Posted: 29 Jan 2022 at 6:56pm
|
That is a really sharp tractor! We don't row crop but with wider tires and more weight it would do the job here. The only thing I'm not too sure of is the JD steps. I think the fit is wrong. The top step is awkward, and the whole setup sticks out too far from the cab. I've used a New Holland three step on my 8070 that works and looks much better. Thanks for posting it. ------------- 405, 7000, 7050, 8050, 8070, L3, 2300 & 2600 disk |
Posted By: ranger43
Date Posted: 31 Jan 2022 at 6:33pm
46,500 and don't even get a throttle on the console 
|
Posted By: EPALLIS
Date Posted: 31 Jan 2022 at 7:28pm
| My Lord, a 35+ year old tractor with 236 hours is barely 6 weeks worth of work. Amazing! |
Posted By: PeteMN
Date Posted: 31 Jan 2022 at 8:09pm
| It's got nice rubber and dual hardware, but based on the pictures I'd say the selling price was probably double what it's worth. Not sure what that decal is on the fiberglass hood, was the tractor special for some reason? For example, the step on the right side is what the early 8050's had, was the tractor used for the Nebraska test trials or something like that which gave it added value to a collector? |
Posted By: AllisandGleaner
Date Posted: 01 Feb 2022 at 8:55am
| Wondering why they widened out the rear inner wheels by installing bands in them. Drawbar support has a considerable amount of wear for 200 hrs it’s closer to 3000 like someone said above. If it was indeed that low hours why all the newer rubber I’ve got a 7060 with 3,600 hrs and it’s still sporting all 4 original tires on the rear. |