Print Page | Close Window

426 wrist pins needed

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=185824
Printed Date: 01 Jul 2022 at 8:41am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 426 wrist pins needed
Posted By: Butch(OH)
Subject: 426 wrist pins needed
Date Posted: 16 Jan 2022 at 6:14pm
I need at least 2 up to a dozen wrist pins for the earlier 426 engines, these would be 1 1/2" diameter. Good used is fine, NOS or aftermarket. Thanks!



Replies:
Posted By: DougG
Date Posted: 16 Jan 2022 at 7:16pm
Ebay had some


Posted By: steve fischer
Date Posted: 17 Jan 2022 at 8:22am
small or big hole I think they are 4 oz different , do not use both kinds in one engine 


Posted By: Butch(OH)
Date Posted: 17 Jan 2022 at 9:47am
Makes no differance Its the small pin for 3400 and earlier 3500 engines as long as its 3.500" long. These are not going in an Allis engine, hoi g in a single cyl and will be modified for my application.


Posted By: Fred in Pa
Date Posted: 17 Jan 2022 at 12:45pm
 Take ur pick .

-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
Just because you do not have the tools for job , it dose not make it a bad design.


Posted By: d17brown
Date Posted: 23 Jan 2022 at 5:55pm
I have a set , just removed

-------------
phil



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net