Farm Equipment - AC6089 Block Heater Remove and Replace

Print Page | Close Window

AC6089 Block Heater Remove and Replace

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184795
Printed Date: 19 Apr 2024 at 4:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: AC6089 Block Heater Remove and Replace

Posted By: REM
Subject: AC6089 Block Heater Remove and Replace
Date Posted: 25 Nov 2021 at 2:38pm

I recently purchase an AC6080. The Block heater is bad and I purchased a new one from Countryside Tractor. But, due to the design of the pipe to the oil cooler I am not able to remove the old Block heater. Any suggestions? My first thought is to cut the tube going to the oil cooler and then run a rubber hose form the new heater to the oil cooler (the new heater is a slightly different design in that it only has a short stub for the oil cooler line).

Replies:

Posted By: DougG
Date Posted: 25 Nov 2021 at 7:32pm

Yeah Ive dealt with those and the last thing I thought was - do i gotta split this thing to get a new one in , lol- quite a design- i have cut the tube and used as much of it as i could then used high temp rubber hose to connect,

Posted By: Alvin M
Date Posted: 26 Nov 2021 at 7:28am

Cut old tube off and use part of it to fit to oil cooler hook up with new hose in kit