70 and 80 series mounted plows
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184487
Printed Date: 02 Sep 2025 at 11:32pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 70 and 80 series mounted plows
Posted By: DrAllis
Subject: 70 and 80 series mounted plows
Date Posted: 09 Nov 2021 at 8:58am
|
If anyone has a 70/80 series 4 x 14's fully mounted plow with 3-point hitch hook-up, I'd like to know where the lift/pullbar is situated from the right side. I have access to a 3 x 16's to look at and the right pull pin is 6 inches from the side of the frame. Thinking a 4 x 14's may be less than 6 inches ?? I know an Owners manual to that series of plow would have this info in it. Thanks.
|
Replies:
Posted By: DrAllis
Date Posted: 09 Nov 2021 at 3:11pm
|
Thank you Skyhighballoon(MO) for the pictures from an owners manual. What I'm trying to do is make my snap-coupler plow fit onto my One-Seventy high-platform tractor so I can show it off at a plow day next Spring. I have removed four 5/8" bolts to remove the snap-coupler pull tongue and plan on building a hitch that I can bolt to the front of the plow frame. My new hitch will make the plow about 4 inches farther back, but I'm not too concerned about that. I just needed the dimensions of the pull bar to get it positioned correctly. I doubt that I'll get any practice runs before showing it off to the other brands of tractors and plow, so I gotta have it right when I get there. Thanks again.
|
Posted By: Tracy Martin TN
Date Posted: 09 Nov 2021 at 6:18pm
Mike is the best!
-------------
No greater gift than healthy grandkids!
|
Posted By: IBWD MIke
Date Posted: 10 Nov 2021 at 9:01am
Doc, do you have the pull-bar parts you need? I have a semi-mount 4-16's No.84 that is going to become a parts plow. Not sure if any of it would help you or not?
|
Posted By: DrAllis
Date Posted: 10 Nov 2021 at 9:04am
|
Thanks, but no. I'm custom making this so with just about 6 bolts and can switch back and forth between snap-coupler and 3-pt on the same plow. Ambidextrous I guess.
|
Posted By: IBWD MIke
Date Posted: 10 Nov 2021 at 9:20am
Sounds like a good way to go, I like to make things so they can be put back to original and not be able to tell they were ever modified too.
|
|