Farm Equipment - Allis B hydraulic

Print Page | Close Window

Allis B hydraulic

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=184202
Printed Date: 17 May 2024 at 5:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis B hydraulic

Posted By: Kiwi
Subject: Allis B hydraulic
Date Posted: 27 Oct 2021 at 8:56am

Hi all I have just about finished my B restoration and had it running for the first time today and worked the hydraulics the ram went out but I can’t get it back in even with some weight on it the lever is in the down position. I don’t want to start pulling things to bits Willy nilly because of the new paint job were should I be looking first.thanks for your help in advance

-------------
Tractors Allis EB,two C,diesel G

Replies:

Posted By: PaulB
Date Posted: 27 Oct 2021 at 12:07pm

If the packing nut is too tight, that will cause that.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY

Posted By: steve(ill)
Date Posted: 27 Oct 2021 at 3:59pm

You can use a bar clamp to push it back in... best to have an implement on the tractor and its weight and mechanical advantage should push it back in. Paul is right, the packing it holding it.. they get old and hard.... might still be OK once some weight on it... 200 pounds might not be enough.

-------------
Like them all, but love the "B"s.