HD6 Transmission Locking Plunger Boot
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183620
Printed Date: 29 Apr 2025 at 11:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6 Transmission Locking Plunger Boot
Posted By: jwoods
Subject: HD6 Transmission Locking Plunger Boot
Date Posted: 02 Oct 2021 at 2:04pm
|
Hello All, I thought the input shaft seals were leaking on my HD6, but after taking a closer look, the locking plunger boot has 2 holes in it. Reviewing the parts and repair manual, there's no other dynamic seal on the plunger itself, and is the suspect in my leaking tranny. Anyone else have experience with this one? They're available aftermarket through General Gear. Also, will the plunger come out the front of the transmission without other disassembly? Or can I replace it without removal?  Thanks, Joe
|
Replies:
Posted By: gemdozer
Date Posted: 02 Oct 2021 at 4:44pm
| The locking plunger can be disconnect to the rod yoke and if you whant removed the plunger from the front you have to removed the sleeve locking plunger and pull the rod and if the transmission is over full the oil will leaking some were |
Posted By: CAL(KS)
Date Posted: 06 Oct 2021 at 10:47am
|
general gear @ http://www.tractorparts.com" rel="nofollow - www.tractorparts.com has new boots and driveshaft seal kits ------------- Me -C,U,UC,WC,WD45,190XT,TL-12,145T,HD6G,HD16,HD20 Dad- WD, D17D, D19D, RT100A, 7020, 7080,7580, 2-8550's, 2-S77, HD15 |
Posted By: jwoods
Date Posted: 06 Oct 2021 at 6:10pm
|
Thanks Cal, I called them and ordered the boot, going to try it first.
|