CA Air Filter Oil Cup
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183607
Printed Date: 22 May 2025 at 5:21pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA Air Filter Oil Cup
Posted By: rustyorange45
Subject: CA Air Filter Oil Cup
Date Posted: 01 Oct 2021 at 9:44pm
|
I have two CA tractors in need of the oil cup. The part number is 225857. Any help on replacements is greatly appreciated. Thanks, Tim ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Replies:
Posted By: sparky
Date Posted: 02 Oct 2021 at 3:23am
|
Just make sure that your replacement cup has the bevel on it or it will not clear the block. I bought one from a vendor that said it would work but it didn’t have the bevel and it will not work. Just trying to save you some trouble. ------------- It's the color tractor my grandpa had! |
Posted By: rustyorange45
Date Posted: 02 Oct 2021 at 7:11am
|
The factory cup is 4 3/4 od and 4 7/16 id. I have seen the one that various vendors sell and it did not have the bevel, so l didn't buy one. One my cups is beat up pretty bad and the other has a rust hole in the bottom. I can probably fix the rusty one but if I can buy new I would. ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: IBWD MIke
Date Posted: 02 Oct 2021 at 7:24am
|
Pretty sure I have one off a tractor I parted out, central Ia. location. |
Posted By: ACCA52
Date Posted: 04 Oct 2021 at 7:46pm
| https://stores.djstractorparts.com/allis-chalmers-b-ib-c-ca-rc-air-cleaner-oil-cup-ac-047d/%20" rel="nofollow - https://stores.djstractorparts.com/allis-chalmers-b-ib-c-ca-rc-air-cleaner-oil-cup-ac-047d/ |
Posted By: PaulB
Date Posted: 05 Oct 2021 at 7:01am
|
Most of the oil bowls sold fit the early CA that uses the same small air cleaner as the B & C tractors that have the spring clips on the cup. I have not seen any aftermarket source for the larger CA and late B air cleaners with the screw clamp for the oil bowl. Good used or if your lucky, NOS may be your only options. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: steve(ill)
Date Posted: 05 Oct 2021 at 8:35am
you can buy either type at STEINER.. OLD CLIP or NEW CLAMP.. ------------- Like them all, but love the "B"s. |
Posted By: sparky
Date Posted: 05 Oct 2021 at 8:52am
|
That’s good to know. When I was looking for one back a couple of years they only offered the clip style cup. ------------- It's the color tractor my grandpa had! |
Posted By: rustyorange45
Date Posted: 05 Oct 2021 at 10:03am
|
None of the ones that Steiner carries is the right one for my air cleaner. They are to small and the one that is the right diameter does not have the beveled back. ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: steve(ill)
Date Posted: 05 Oct 2021 at 1:08pm
|
There was a bigger cup used on the D10-12-14 that was 4-3/4... but it has straight walls on the outside...your saying yours is that OD size, but taper walls..?.. thats odd. Dont recall seeing any aftermarket like that. ------------- Like them all, but love the "B"s. |
Posted By: rustyorange45
Date Posted: 05 Oct 2021 at 1:17pm
|
My cup has a beveled back to clear the block I don't know if the straight walled cup will clear the block. Both of my CA tractors have the same cup, one is a 52 and the other is a 53. ------------- 1953 WD45 WF/Model 90 Loader, Oxnard Rear Blade, 80R Mower, Model 209 Disc, WD Rear Mounted Scoop, Model 184 & 160 Rotary Mowers, 1952 CA NF/L306CA mower, 1953 CA WF/Model 8 Loader. |
Posted By: PaulB
Date Posted: 05 Oct 2021 at 1:19pm
|
Those shown above are not correct for a CA with a clamp type cup. They will only work on the early CA that has the same small air cleaner as the early B the C and RC with the spring clips. The larger late model CA air cleaner has straight sides and a bevel to clear the block. The air cleaners on the D10/12 tractors are spaced out at the mount so that a straight sided cup works. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |