Buda engines 230, 262, 273, 301
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183269
Printed Date: 29 Apr 2024 at 7:38am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Buda engines 230, 262, 273, 301
Posted By: Macon Rounds
Subject: Buda engines 230, 262, 273, 301
Date Posted: 16 Sep 2021 at 11:16am
Recently heard of Buda 301 engine....
Anyone have info on what this engine came in ?
-------------
The Allis "D" Series Tractors, Gravely Walk behind Tractors, Cowboy Action Shooting !!!!!!! And Checkmate
|
Replies:
Posted By: DrAllis
Date Posted: 16 Sep 2021 at 11:19am
|
291 I think (bored block) not a 301 from Buda.
|
Posted By: Gary Burnett
Date Posted: 16 Sep 2021 at 12:04pm
273 block from a Cockshutt 50 using AC 262 crank will get you close to that.Can also bore the 273 block a little bit.
|
Posted By: Fred in Pa
Date Posted: 17 Sep 2021 at 6:57am
No input from where u heard of this.
-------------
He who dies with the most toys is,
nonetheless ,still dead.
If all else fails ,Read all that is PRINTED.
|
Posted By: wade89
Date Posted: 17 Sep 2021 at 7:57am
|
273 bored block diesels were used in the Allis TL-12 loaders and Industrial equipment. Have one with spun rod bearing that we swapped out for a 262 gas. Intend on using the 262 crank from our D19 Gas to build a bigger cube turbo diesel. Never heard of a 301 though.
|
Posted By: injpumpEd
Date Posted: 17 Sep 2021 at 8:53am
Many people still refer to the 301 and 426 as Buda engines, even though those were built long after AC bought the Buda engine division. They may have been on the drawing boards at Buda though! Who knows!
-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!
|
Posted By: DrAllis
Date Posted: 17 Sep 2021 at 9:18am
|
A-C bought Buda in 1953. The 301 and 426 were released in 1964 and 1963 respectively. I think all the Buda Engineers were retired (or dead) by then.
|
Posted By: DougG
Date Posted: 17 Sep 2021 at 5:46pm
|
I have an Allis Scope or quarterly magazine they put out ; one was focused on the new Harvey Engine plant ; seems when Allis bought it , there wasnt assembly lines etc and Allis was wanting to grow- interesting things they done in the NEW Allis engines on the board
|
|