Allis drag disk
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183204
Printed Date: 26 Apr 2024 at 1:20am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Allis drag disk
Posted By: 185turbo
Subject: Allis drag disk
Date Posted: 12 Sep 2021 at 9:28pm
|
I have a 8 ft drag disk and the bearings are out on the front left gang. Does anyone know where to get them or if they are available?? will try and a attach a picture Thanks ------------- 185 turbocharged w/ 500 loader , WD |
Replies:
Posted By: 185turbo
Date Posted: 12 Sep 2021 at 10:03pm
 ------------- 185 turbocharged w/ 500 loader , WD |
Posted By: Allis dave
Date Posted: 13 Sep 2021 at 9:10am
| The old Allis drag disks like that that I see have wood block bushings not bearing. You could make your own wood block or get some poly bars from McMastercar and made your own. They have some especially slippery ones designed to be used as bushings. |
Posted By: JimIA
Date Posted: 13 Sep 2021 at 9:24am
|
Call Gary Agrimson. I think he had some plastic bearings made. 763-566-3446 ------------- An open eye is much more observant than an open mouth |
Posted By: 185turbo
Date Posted: 13 Sep 2021 at 12:09pm
|
Pretty sure these are metal bearings with grease zerks ------------- 185 turbocharged w/ 500 loader , WD |
Posted By: Allis dave
Date Posted: 13 Sep 2021 at 3:37pm
| Take another look. There's an Allis drag disk at Grandpa's. I think it's wood blocks with grease zerks. The balpak bearings used by Allis a little later weren't greaseable. |
Posted By: 55allis
Date Posted: 13 Sep 2021 at 6:41pm
| How rare are they? |
Posted By: 185turbo
Date Posted: 13 Sep 2021 at 10:12pm
|
These have a cast outer housing and there will is a metal inner race on the gang shaft I will try and get pictures ------------- 185 turbocharged w/ 500 loader , WD |
Posted By: Allis dave
Date Posted: 15 Sep 2021 at 9:34am
|
Take a look in the knowledgebase section. There is an article on rebuilding the balpak bearings. It has some pictures and you can see if they match what you have. Are these drag disks rare? I know of several but I think generally these are getting scrapped by now. Neat old pieces but not very useful anymore.
|