Print Page | Close Window

WC front bolster

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=183055
Printed Date: 07 Apr 2026 at 12:33pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: WC front bolster
Posted By: acd17toy
Subject: WC front bolster
Date Posted: 04 Sep 2021 at 6:16pm

 Does anyone have a after market number for the bearing  and cup, and seals on the steering shaft in the front bolster,  I ordered one from local Agco dealer  over a week ago said it would be here with in 5 days, still has not arrived. This for a 1939 WC with narrow front end.



Replies:
Posted By: Mikez
Date Posted: 05 Sep 2021 at 10:02pm
the steering shaft going into front end or the front pedestal 


Posted By: MACK
Date Posted: 06 Sep 2021 at 7:51am
Get # off old bearings and go to local auto parts store.                    MACK


Posted By: acd17toy
Date Posted: 06 Sep 2021 at 6:13pm


Mac, went to local parts house and they could not find any matches for the  numbers on the bearing and cup.


Posted By: JoeM(GA)
Date Posted: 06 Sep 2021 at 8:35pm
I have Timken #1931 for the (70)211584 cup
and Timken #1986 for the (70)211585 cone wrote in my book, but that was 21 years or so ago, I didn't write down the seal I used, but I just measured the shaft and case and found one that would fit


-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB


Posted By: Mikez
Date Posted: 06 Sep 2021 at 9:38pm
which ones are you looking for. I’ll see what we have



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net