Farm Equipment - G engine block

Print Page | Close Window

G engine block

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=182857
Printed Date: 02 Apr 2026 at 4:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: G engine block

Posted By: Kiwi
Subject: G engine block
Date Posted: 28 Aug 2021 at 8:31am

Hi all I have a G engine block that has broken the bolts holes out where the draw bar bolts up to is there anyway I can weld them up and redrill the holes or is it a case of finding another block. Someone has fixed it up with what looks like JB weld and drilled holes on the flat piece about 2 inches back to fit the draw bar I would like to fix it properly any ideas thanks

-------------
Tractors Allis EB,two C,diesel G

Replies:

Posted By: JoeM(GA)
Date Posted: 28 Aug 2021 at 10:40am

if you really plan to use the draw bar, or have an implement that uses the draw bar as a mount (disc plow, sickle bar mower, etc) I'd really be hunting another block, that spot is weak enough when in good shape!

-------------
Allis Express North Georgia
41 WC,48 UC Cane,7-G's,
Ford 345C TLB