Farm Equipment - 7000 black belly clutch problems

Print Page | Close Window

7000 black belly clutch problems

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181987
Printed Date: 27 Apr 2024 at 4:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7000 black belly clutch problems

Posted By: WILLOPS
Subject: 7000 black belly clutch problems
Date Posted: 24 Jul 2021 at 5:03pm

My 7000 has been hard to get into gear since I bought it in January, now that I’m able to use it it has gotten worse, and now it’s to the point where when the pedal is depressed the tractor is still pulling. Where do I test the clutch pressures at, the i&t manual doesn’t show this transmission in the 7000 section and the 7010 sec looks different than what I have. Also the pto is stuck on but the cable is operating the valve as should, not sure if it related but figured I’d let y’all know just in case it is. Thanks for any help.

Replies:

Posted By: WILLOPS
Date Posted: 24 Jul 2021 at 6:14pm

I can stop the pto with a board as a break

Posted By: MACK
Date Posted: 24 Jul 2021 at 9:33pm

If it is a back belly, there is a test port on valve body, right side behind battery. Sounds more like a Marroune belly painted black. Is your PD lever coming back to low when you push clutch to the floor? MACK

Posted By: WILLOPS
Date Posted: 25 Jul 2021 at 5:34am

Yes it’s coming back to low, I see at least 3 ports that could be tested on the valve, my sn is 8357 so I’m pretty sure it’s a factory black belly.