D10 Exhaust manifold torque setting?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181569
Printed Date: 20 Oct 2025 at 6:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: D10 Exhaust manifold torque setting?
Posted By: SeriesIII
Subject: D10 Exhaust manifold torque setting?
Date Posted: 04 Jul 2021 at 4:55pm
| Can anyone tell me what the torque setting should be on the manifold putting a new one on |
Replies:
Posted By: DiyDave
Date Posted: 04 Jul 2021 at 6:41pm
I can't remember, exactly, But I thought it was kinda low, like 20-25 foot lbs. I'm sure others will correct me, if I'm way far off... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: PaulB
Date Posted: 04 Jul 2021 at 7:34pm
tight enough to hold, loose enough not to break off the ears on the ends  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: DrAllis
Date Posted: 04 Jul 2021 at 10:15pm
| And whatever torque you settle in on, recheck them every time you use the tractor when they are stone COLD until they don't move anymore. |