AC D17 implement- what is it for?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181566
Printed Date: 02 Mar 2026 at 10:50pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC D17 implement- what is it for?
Posted By: Chevy52
Subject: AC D17 implement- what is it for?
Date Posted: 04 Jul 2021 at 2:19pm
|
We bought an AC D17 from the 1950’s and 5 implements came with it. However, we’re not sure what these two are for. Can anyone help? Thanks
|
Replies:
Posted By: HD6GTOM
Date Posted: 04 Jul 2021 at 2:28pm
| The one with the hubs on it is a narrow front for a 17. |
Posted By: HD6GTOM
Date Posted: 04 Jul 2021 at 2:31pm
| [QUOTE=HD6GTOM] The one with the hubs on it is a narrow front for a 17. The other is part I think is the belt pulley mounting bracket |
Posted By: DiyDave
Date Posted: 04 Jul 2021 at 2:55pm
the pulley probably had fiber discs around those pins, that rotted off... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Chevy52
Date Posted: 04 Jul 2021 at 3:08pm
| Thanks for the help. |
Posted By: jaybmiller
Date Posted: 04 Jul 2021 at 4:10pm
|
BTW the right rear looks kinda flat and on backwards ???? ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: steve(ill)
Date Posted: 04 Jul 2021 at 4:58pm
------------- Like them all, but love the "B"s. |
Posted By: Gary
Date Posted: 04 Jul 2021 at 6:16pm
|
That loader frame was actually meant for a WD. D-17 Loader Frames normally attach to the rear axle housing. Gary |
Posted By: Chevy52
Date Posted: 04 Jul 2021 at 6:52pm
| Good to know. We picked up the tractor and all implements for cheap. Too good of a deal to pass up. Plan to get it all figured out. Couldn’t pass it up for the price we paid for all of it. |
Posted By: MACK
Date Posted: 04 Jul 2021 at 8:54pm
| The belt pulley dive has been modified for something else. MACK |
Posted By: Sugarmaker
Date Posted: 06 Jul 2021 at 5:19am
|
Congrats on the 17! Awesome tractor! Yes hang on to those parts. They tell me that your tractor probably was a narrow front ( the pedestal) And I would agree with MACK, the pulley set up was removed and it looks like it has mods. Could you take some additional pictures of that pulley assembly? Yes you tractor has a WD style loader frame rigged on it. You did good saving this one! Welcome to our world! Regards, Chris ------------- D17 1958 (NFE), WD45 1954 (NFE), WD 1952 (NFE), WD 1950 (WFE), Allis F-40 forklift, Allis CA, Allis D14, Ford Jubilee, Many IH Cub Cadets, 32 Ford Dump, 65 Comet. |