WTB - Tubo lines for 190XT
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181322
Printed Date: 28 Apr 2024 at 3:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: WTB - Tubo lines for 190XT
Posted By: whizone
Subject: WTB - Tubo lines for 190XT
Date Posted: 21 Jun 2021 at 3:15pm
| If anyone has a set of turbo charger lines for a 190XT (D2900) which they would like to sale please let me know. I am installing a new turbo and need lines for it. Thank you. |
Replies:
Posted By: Joe(TX)
Date Posted: 21 Jun 2021 at 3:37pm
|
Which turbo, Rayjay or Thompson (Garret)? Line are different. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: DougG
Date Posted: 21 Jun 2021 at 6:00pm
| I make them out of copper tubing with compression fittings , works good |
Posted By: whizone
Date Posted: 21 Jun 2021 at 8:36pm
| I'm not sure as I bought it off of ebay as an aftermarket designed to fit my application. 190xt with D2900 engine. Is there anyway to tell which one it is like so as to determine what line specs it will use? Thanks for the info. |
Posted By: DrAllis
Date Posted: 21 Jun 2021 at 8:45pm
| There is a metal tag on every turbo that should have the brand name. Air-Research/Garret....Thompson/Rajay. D-2900's had both brands over the years. |
Posted By: whizone
Date Posted: 21 Jun 2021 at 9:00pm
|
the tag says A&I Products, Part No: TC9171, has M24 and Air.60 cast on the housing. Hope this makes sense. Thanks. |
Posted By: Joe(TX)
Date Posted: 22 Jun 2021 at 10:02am
|
The drain tube for the turbo bolts on on the Thompson(air research) with 2 bolts. Probably says AR 60. That's the aspect ratio of the housing. The aftermarket ones are clones of the Thompson. You can go to agcopartsbooks.com to see the differences. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: DrAllis
Date Posted: 22 Jun 2021 at 12:23pm
| Thompson was the brand of turbo used on the D-19 and D-21's and then on early 190XT's. The Thompson brand turbo's became Rajay brand and were used on some 7000's, 7040's, etc. The Air-Research brand was eventually bought out by Garret. This brand of turbo has always been far better than any Thompson or Rajay. |
Posted By: whizone
Date Posted: 22 Jun 2021 at 1:24pm
| So what brand type is mine? Thanks |
Posted By: Joe(TX)
Date Posted: 22 Jun 2021 at 2:03pm
|
Sorry for mudding the waters. I meant Air-research(Garret} and not Thompson. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: whizone
Date Posted: 26 Aug 2021 at 9:38pm
| Guys still trying to locate lines for my new turbo. Does anyone have any used ones, or specs for the lines so I can build them out myself. Thanks. |
Posted By: DrAllis
Date Posted: 27 Aug 2021 at 8:14am
| How about a picture of your turbo ?? to determine which brand it is. There are hundreds of salvage combines and tractors out there with exactly what you need. The model 7000 farm tractor for example had both Air-Research and Rajay turbos, but you need to know which one you have before you can hunt for used lines. You say for your 190XT. Where are your old lines ??? |
Posted By: whizone
Date Posted: 27 Aug 2021 at 9:19am
|
The tractor previously did not have a turbo on it, I am putting a new one on it. Attached are images of the turbo I purchased for it. Thanks for all your help. uploads/18283/Turbo.jpg" rel="nofollow - uploads/18283/Turbo.jpg uploads/18283/Turbo3.jpg" rel="nofollow - uploads/18283/Turbo3.jpg
|
Posted By: Joe(TX)
Date Posted: 27 Aug 2021 at 5:22pm
|
That's an Air Research clone for 190 etc. It uses the flanged drain line. ------------- 1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A |
Posted By: DrAllis
Date Posted: 27 Aug 2021 at 7:45pm
| Turbo drain tube from a later XT, 200, 7000 many M-series combines should fit as long as it has an Air Research turbo. The oil feed line may have to be fabricated. Some of them came off of the engine oil cooler (which you don't have) and some came from the engine block itself. If you can find a correct one, great. If not, 5/16" or 3/8" copper tubing and some brass fittings. |
Posted By: FREEDGUY
Date Posted: 27 Aug 2021 at 10:01pm
Just curious, what are you attempting to achieve with your "turbo" upgrade from the stock engine ? Kudo's to you for your ambition  , but seems like a lot of work for "not much gained"?? I'm probably wrong though if you're turning your buggy into a puller though  . Like I said, just curious. Good luck with your search 
|
Posted By: WF owner
Date Posted: 28 Aug 2021 at 5:43am
| If you have ever worked with a stock, naturally aspirated, 190 diesel verses a turbocharged 190XT, you would realize there is a lot to be gained by adding a turbo. |
Posted By: John m
Date Posted: 01 Sep 2021 at 7:10am
| A guy just posted he has a 190xt tractor he got for parts on this site. Good luck |
Posted By: DrAllis
Date Posted: 01 Sep 2021 at 7:24am
| That age of a 190XT probably has a Thompson/Rajay turbo..wrong lines. |
Posted By: whizone
Date Posted: 01 Sep 2021 at 8:47am
| Guys my tractor is a 65' 190xt. Its serial is 5654. The engine on it is a non tubo D2900. Does anyone have a pic illustrating where the lines connect on the engine? That would be helpful at this point. Thanks. |