Farm Equipment - 200 hydraulic issue

Print Page | Close Window

200 hydraulic issue

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181188
Printed Date: 22 Aug 2025 at 8:03am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 200 hydraulic issue

Posted By: K bockting
Subject: 200 hydraulic issue
Date Posted: 14 Jun 2021 at 4:10pm

Lost steering and pressure to power director will move when idled up.
2300 psi at remote. Have had issues with flow divider sticking. Has hydraulic pto any ideas? Thanks

Replies:

Posted By: Joe(TX)
Date Posted: 14 Jun 2021 at 9:20pm

Most likely the flow divider.

-------------
1970 190XT, 1973 200, 1962 D-19 Diesel, 1979 7010, 1957 WD45, 1950 WD, 1961 D17, Speed Patrol, D14, All crop 66 big bin, 180 diesel, 1970 170 diesel, FP80 forklift. Gleaner A

Posted By: DrAllis
Date Posted: 15 Jun 2021 at 8:18am

There is one big pump that satisfies the power steering/power director/pto circuit (priority) and then the hitch lift/remote circuit. If you have good pressure/flow at the remotes, it has to be related to the flow divider spool somehow.

Posted By: K bockting
Date Posted: 15 Jun 2021 at 10:37am

Yes flow divider sticks. Any recommendations?

Posted By: Amos
Date Posted: 15 Jun 2021 at 11:09am

Take out the flow divider spool and polish the bejeezuz out of it. Make sure there is nothing causing it to stick, like a tiny spec of dirt or chunk of o-ring or such in its passage

Posted By: DrAllis
Date Posted: 15 Jun 2021 at 12:19pm

Might be time to drop the sump and clean/inspect the suction screen and change the hyd oil and filter. Polish that spool with emery cloth and clean the bore until the spool is free to slide.

Posted By: K bockting
Date Posted: 15 Jun 2021 at 6:43pm

Thanks for the replies.
Just had split for pd rebuild all new oil and filter. Been an on and off again issue. Probly crud in system
Got it going for now