Farm Equipment - Adding a remote to a 8000 series

Print Page | Close Window

Adding a remote to a 8000 series

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181108
Printed Date: 15 Oct 2025 at 7:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Adding a remote to a 8000 series

Posted By: victoryallis
Subject: Adding a remote to a 8000 series
Date Posted: 10 Jun 2021 at 5:40am

My 8030 only has 2 sets of outlets I would like 3 at least. How much of a undertaking is adding one more? Or do I just buy a multiplier.

-------------
8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760

Replies:

Posted By: Leon B MO
Date Posted: 10 Jun 2021 at 6:42am

I added one remote to one 8050 and installed a multiplier to another for our planters. The worst part of installing the third valve was the handle and linkage, not much room to work around the seat. The multiplier is pretty simple to wire and use. It may also depend on how much you need the use the third remote. With the multiplier you need to flip a switch each time to go from one to the other. I only need the 3rd remote to put planter in transport mode. If I needed anther tractor with a 3rd remote, I'd probably go with the multiplier.

Leon B MO

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".