Print Page | Close Window

615 diesel d2200 backhoe won’t start

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=181062
Printed Date: 29 Mar 2024 at 5:08am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: 615 diesel d2200 backhoe won’t start
Posted By: Green135
Subject: 615 diesel d2200 backhoe won’t start
Date Posted: 08 Jun 2021 at 11:28am
I’m new hoping someone can help I have a late 60s 615 when I try to start it when it’s just about to catch it seems like either starter disengages or engine shuts down I’ve gone through the wiring new battery rebuilt starter at a dead end   



Replies:
Posted By: NomoreJohnDeere
Date Posted: 08 Jun 2021 at 4:33pm
describe more or post a video.........

-------------
HD3


Posted By: Ray54
Date Posted: 08 Jun 2021 at 7:12pm
Have you bleed the fuel system?


Posted By: Green135
Date Posted: 09 Jun 2021 at 11:27am
Yes bleed when I changed fuel filter was running fine then started doing this. I’ve looked in to it more I think it maybe be fuel shut off selnoid gone bad would than cause complete engine shut down ? Wouldn’t it just keep cranking just not start?


Posted By: injpumpEd
Date Posted: 09 Jun 2021 at 12:42pm
You most likely put a seal in the top of the filter where it doesn't belong, then it blocks fuel flow. Does this have the small cartridge fuel filter?

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!


Posted By: Green135
Date Posted: 09 Jun 2021 at 7:37pm
It’s got fuel supply it was running after I put new filter on just started doing this


Posted By: nickia
Date Posted: 09 Jun 2021 at 10:13pm
i had the same issues with my 615  take a jumper wire and run it from the injection pump to your postive side of your battery and see if it firee


Posted By: Eric B
Date Posted: 10 Jun 2021 at 3:47pm
If it stops cranking there is definitely an electrical issue, it shouldn't be the starter if it's just rebuilt. Did you get a new external solenoid? If you boost directly to the starter terminal the starter will not cut out if it is good.

-------------
Currently- WD,WC,3WF's,2 D14's B. Previously- I 600,TL745,200,FL9,FR12,H3,816 LBH. Earth has no sorrow that Heaven cannot heal!


Posted By: Green135
Date Posted: 11 Jun 2021 at 11:02am
Haven’t had a chance to work on i will give update as soon as I work on it thanks for all the input



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net