bumper pull trailers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=180845
Printed Date: 12 Aug 2025 at 9:24pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: bumper pull trailers
Posted By: mash52
Subject: bumper pull trailers
Date Posted: 29 May 2021 at 9:19am
|
Did Allis Chalmers manufacture any bumper pull trailers? ------------- '63D10II/'64D12III |
Replies:
Posted By: Fred in Pa
Date Posted: 29 May 2021 at 9:29am
|
Yes I had one sold it to Butch C in Ohio , one I had was made for the fork lift tractors ------------- He who dies with the most toys is, nonetheless ,still dead. If all else fails ,Read all that is PRINTED. |
Posted By: john(MI)
Date Posted: 29 May 2021 at 11:20am
|
They made on for the Terra Tiger as well. ------------- D14, D17, 5020, 612H, CASE 446 |
Posted By: steve(ill)
Date Posted: 29 May 2021 at 12:15pm
|
did they actually MAKE them or just rebadge others ? ------------- Like them all, but love the "B"s. |
Posted By: DiyDave
Date Posted: 29 May 2021 at 5:32pm
|
Snowco made and re-badged trailers for a lot of farm equipment dealers. Damn good trailer, too! I still have one that came from Flinch equip, in Westminster... ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: mash52
Date Posted: 29 May 2021 at 6:31pm
Thank for the info. The following pics are of a tilt bed trailer that the owner says is an AC. Is it? If so, I may take a look at it.   ------------- '63D10II/'64D12III |
Posted By: steve(ill)
Date Posted: 29 May 2021 at 7:27pm
Thats the little SNOWCO trailer that was made FOR Allis... as Dave mentioned above.... nice little trailer.
 ------------- Like them all, but love the "B"s. |
Posted By: DiyDave
Date Posted: 29 May 2021 at 8:18pm
|
It may be one sold by Allis, but it is definitely a Snowco! I had one like in Steve's picture, sold it, regretted it for 20 years. The one I have now is the biggest SA made by Snowco, flat deck, cept for a little kink downward at the rear, fold up rear mesh ramp, not a tilt bed like Steve's and yours. Search snowco trailer images, on google, they made quite a variety, through the years. Here's one similar to mine: https://images.app.goo.gl/msATeyx9N7nUoTd47" rel="nofollow - https://images.app.goo.gl/msATeyx9N7nUoTd47
------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: mash52
Date Posted: 29 May 2021 at 8:43pm
|
Fantastic!!! Now the most important question: what might its value be? ------------- '63D10II/'64D12III |
Posted By: DiyDave
Date Posted: 30 May 2021 at 5:23am
I paid $600 for mine, about 3 years ago. Flip it over, and take a good look for frame rust, particularly near the frame, at the spring shackles...  ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
DiyDave wrote: