Farm Equipment - 180 rear wheels

Print Page | Close Window

180 rear wheels

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=180760
Printed Date: 08 Sep 2025 at 2:10am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 180 rear wheels

Posted By: DrAllis
Subject: 180 rear wheels
Date Posted: 25 May 2021 at 8:39pm

We had some tires swapped on a 1969 One-Eighty with the optional 18.4 x 28 rear wheels, and the rims measure 16 inches in width. P/n is 70253174 and this rim is used from series 4 D-17's thru 185's. The standard rim is 70252439 and would measure 13 inches, as I have a pair of those from a friends D-17 IV on my WD45.

Replies:

Posted By: Ed (Ont)
Date Posted: 26 May 2021 at 8:43pm

I have 13” rims on my WD45 and 14.9 by 28 Firestone tires. Works well. Thought I would go 1” bigger when I replaced the original rusted ones. On these new rims the original locks don’t fit properly. Can only get one lock on. I think I will drill extra hole to accommodate two.

Posted By: DrAllis
Date Posted: 26 May 2021 at 9:02pm

Just grind one block down to make it fit. Been there....dun that.

Posted By: Ed (Ont)
Date Posted: 26 May 2021 at 9:14pm

Hey thanks Doc! I never thought of that. 😀