Farm Equipment - D14 starter??

Print Page | Close Window

D14 starter??

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179935
Printed Date: 28 Apr 2024 at 1:27am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D14 starter??

Posted By: Mikez
Subject: D14 starter??
Date Posted: 18 Apr 2021 at 7:10pm

Hello.

Dad had the noise cone break today on the starter on our D14. Would the noise cone out of a B interchange. Thanks

Replies:

Posted By: Steve in NJ
Date Posted: 18 Apr 2021 at 7:24pm

No. The "D" series Starter motors had different nose cones. Gotta' be careful with some of those "D" series Delco Starter motors. Some nose cones were special to a particular model Starter motor. Ran across this years back when I first got back into rebulding these old Delco unit. The drives are different from one another also....

Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: steve(ill)
Date Posted: 18 Apr 2021 at 7:49pm

6 volt starters are different than that later 12 volt starter.

-------------
Like them all, but love the "B"s.

Posted By: Mikez
Date Posted: 18 Apr 2021 at 8:27pm

thanks. Yes it’s 6 volt

Posted By: steve(ill)
Date Posted: 18 Apr 2021 at 8:43pm

????? Would the ORIGINAL 6 volt starters on the D14 be the same as the B ?? This guy thinks so .

https://www.ebay.com/itm/STARTER-DRIVE-HOUSING-B-C-CA-G-IB-WC-RC-WD-WF-WD45-D10-D14-ALLIS-CHALMER-AC-324/313046559782?hash=item48e3076c26:g:3cEAAOSwDRNeiU9K" rel="nofollow - https://www.ebay.com/itm/STARTER-DRIVE-HOUSING-B-C-CA-G-IB-WC-RC-WD-WF-WD45-D10-D14-ALLIS-CHALMER-AC-324/313046559782?hash=item48e3076c26:g:3cEAAOSwDRNeiU9K

-------------
Like them all, but love the "B"s.

Posted By: PaulB
Date Posted: 19 Apr 2021 at 6:17am

Fleabag sellers only want your money. Most couldn't care lees about what might be correct, or work properly

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
If you can't make it GO... make it SHINY

Posted By: Steve in NJ
Date Posted: 19 Apr 2021 at 7:14am

Wrong! Probably going by a catalog that's incorrect. LOL! Those nose cones are not a "Fits All" kinda' piece although these vendors make it sound like they are till someone purchases one and it doesn't work. Then they can't return it cause' it was installed. Gottcha!!

Steve@B&B

-------------
39'RC, 43'WC, 48'B, 49'G, 50'WF, 65 Big 10, 67'B-110, 75'716H, 2-620's, & a Motorhead wife

Posted By: Mikez
Date Posted: 19 Apr 2021 at 8:22am

I only asked because we have a few B’s laying around.

Posted By: steve(ill)
Date Posted: 19 Apr 2021 at 8:32am

Steve, i remember a discussion a few years ago that the ANCHOR hole for the ground bolt was drilled in a different location on some noses.... but you think the physical size is different ? .......... I dont know, just asking ... I have several "B" ... no D.

-------------
Like them all, but love the "B"s.