Farm Equipment - Power shift wheels question

Print Page | Close Window

Power shift wheels question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179910
Printed Date: 25 Jul 2025 at 5:00pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Power shift wheels question

Posted By: fourthgeneration
Subject: Power shift wheels question
Date Posted: 17 Apr 2021 at 11:38pm

I have a 200 and 7020 that have power shift wheels (18.4x38). I don’t think we have ever needed to move them. Is there a rim that will fit on the cast wheel that can still accept snap on duals that is not a power shift wheel?

Replies:

Posted By: MACK
Date Posted: 18 Apr 2021 at 6:04am

Yes, just put eyes in cast centers. Yours probably hook to railed. MACK

Posted By: fourthgeneration
Date Posted: 18 Apr 2021 at 7:50am

Yes it has loops on the rails. What do they call the type of rim I’d be looking for?

Posted By: DrAllis
Date Posted: 18 Apr 2021 at 7:56am

Just a standard non-spin out rim. What are you attempting to do here?? Power shift wheels are needed on some tractors to get down to 30 inch rows. If your clamp on duals now connect to the ends of the power shift rails, if you change to the non-power shift wheel, you'll have to buy eyes for the duals to connect to and you'll also have to buy all the blocks that go between the cast center and the non-power shift wheels. Also switching connection locations may require longer threaded rods to reach the new eyes as they are farther away from the duals. I'm having a hard time figuring out your plan ??

Posted By: SteveM C/IL
Date Posted: 18 Apr 2021 at 2:11pm

what's the down side with your set up?