Farm Equipment - Is 210 and 190 hood the same?

Print Page | Close Window

Is 210 and 190 hood the same?

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179793
Printed Date: 30 May 2025 at 12:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Is 210 and 190 hood the same?

Posted By: ryanschott
Subject: Is 210 and 190 hood the same?
Date Posted: 12 Apr 2021 at 10:45am

Is the 210 hood the same as a 190. If not is there value in the 210 hood

Replies:

Posted By: injpumpEd
Date Posted: 12 Apr 2021 at 11:37am

no, a 210 hood is unique to the 210. They are worth anywhere from $500 to 1000 depending on condition and paint. If in rough shape, would be less.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: DrAllis
Date Posted: 12 Apr 2021 at 11:47am

By part numbers, all 190-190XT-200 and 210's are all different. I'm thinking you might be able to interchange a late 190-190XT and 200 onto a 210, but the muffler and air cleaner holes are probably not cut in the same spots. As a raw unfinished part, they may have been the same.

Posted By: injpumpEd
Date Posted: 12 Apr 2021 at 2:30pm

The 210 hood is quite a bit deeper, look at the sides where the decals are, that tells the story. Would a 190 hood fit on a 210? sure, with enough cobbling. Of course the series 1 190 hood is different from the series 2/3. The biggest difference in the series 2/3 hoods from one another is the exh hole, some were smaller for a straight pipe and others had larger hole for a round muffler.

-------------
210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers!

Posted By: Leon B MO
Date Posted: 12 Apr 2021 at 6:07pm

Wouldn't the 210 have a larger radiator? I would just assume the grill and hood was wider.

Or did they make the rad taller not wider?

Leon B MO

-------------
Uncle always said "Fill the back of the shovel and the front will take care of itself".

Posted By: SteveM C/IL
Date Posted: 12 Apr 2021 at 10:12pm

My 220 hood is made of plate steel instead of sheet metal....not really but it is one heavy SOB!!! You can walk down it with no ill effect.

Posted By: DrAllis
Date Posted: 13 Apr 2021 at 6:30am

220 hoods were stout!! 210's were same gauge as the 190 hood. The grille on a 210 is actually a late 190 grille with a mesh screen on the bottom, so that gives you a feel for the hoods width.