8070
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=179635
Printed Date: 19 Dec 2025 at 3:35pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8070
Posted By: 8070nc
Subject: 8070
Date Posted: 06 Apr 2021 at 1:05pm
New paintbut the picture didnt load ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Replies:
Posted By: SteveM C/IL
Date Posted: 06 Apr 2021 at 1:13pm
| yes it did....large but ok |
Posted By: 8070nc
Date Posted: 06 Apr 2021 at 1:13pm
|
Resized ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: darrel in ND
Date Posted: 06 Apr 2021 at 2:05pm
| Beautiful tractor!!!! |
Posted By: FloydKS
Date Posted: 06 Apr 2021 at 3:03pm
|
agreed, very nice.. ------------- Holding a grudge is like taking poison and expecting the other person to die |
Posted By: Dan Hauter
Date Posted: 06 Apr 2021 at 3:22pm
| Wow! That 8070 is clean, shiny, & freshly painted! Looks great. Well done. |
Posted By: plummerscarin
Date Posted: 06 Apr 2021 at 4:13pm
| Me like |
Posted By: Michael V (NM)
Date Posted: 06 Apr 2021 at 9:38pm
|
i want one... that looks NICE!
|
Posted By: Gregor
Date Posted: 08 Apr 2021 at 3:07pm
| Thing of beauty. Looks like LED's on the stadium lights. You remember what you used. I have a cheap set of LED's on mine from Amazon and radio is unable when the lights are on. |
Posted By: Gregor
Date Posted: 08 Apr 2021 at 3:08pm
| Thing of beauty. Looks like LED's on the stadium lights. You remember what you used. I have a cheap set of LED's on mine from Amazon and radio is unable when the lights are on. |
Posted By: 8070nc
Date Posted: 08 Apr 2021 at 3:58pm
|
They came from Triton. They are as close to the original look as I could find. I dont rember the part number but Ill find out and post it. Youll need to be sitting down when you add up the price cause they were 100.00 apiece 2 years ago ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: 8070nc
Date Posted: 10 Apr 2021 at 11:26pm
 ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: Gregor
Date Posted: 11 Apr 2021 at 8:20am
| Wow, good lights can be expensive. They are pricey from the dealership too. Thanks for the info. Next time one burns out, I'll have to check it out. |
Posted By: victoryallis
Date Posted: 11 Apr 2021 at 1:28pm
Try finding the proper lights from Tiger I haven’t found them under $120 ------------- 8030 and 8050MFWD, 7580, 3 6080's, 160, 7060, 175, heirloom D17, Deere 8760 |
8070nc wrote:Posted By: bigal121892
Date Posted: 11 Apr 2021 at 1:34pm
|
Wow, that picture brings back some memories, thanks for posting.:) |
Posted By: DCAC
Date Posted: 11 Apr 2021 at 2:31pm
| I've got a plow just like that, all I need is the tractor.... |
Posted By: PAFarmer
Date Posted: 11 Apr 2021 at 7:12pm
|
wow! Nice job on the 8070! Gives me some inspiration on mine! For those of you guys asking about LED's I've converted our 8010, 7000 and 6060 all over to LED using Nilight from Amazon. They have been excellent for me. I have them on a Jeep and some other things as well and I can't complain for the cost. They have lasted really well and they are bright as the sun.
|
Posted By: plummerscarin
Date Posted: 11 Apr 2021 at 7:42pm
| Light bars or rounds? |
Posted By: PAFarmer
Date Posted: 11 Apr 2021 at 9:12pm
|
Light bars on the 8010 (Everything is Nilight Part Numbers): 60002F-B - One each in place of the stadium lights 60001F-C - Facing sideways, one on each corner of the cab wired on the field light circuit 18022C-B - Down low, facing forwards wired to the road light circuit I'll take pictures of the 8010 tomorrow if I have a chance and post. The 7000 is all the 60002F-B light bar. On the 6060 I used four 15023SB-B facing forward and two 60002F-B facing back. For the 8070, I have 18027C-A for the stadium lighting and 18021F-D for the corner side facing lights. They're supposed to be brighter than what I have on the 8010, but I can't say as I'm still in the middle of restoring the 8070. I can say that I'm really happy with what I have on the 8010, but if there were one thing I would want to improve, It would be brighter lights on the corners. So the 18021F-D might be the answer to that. The 8010 is our main hay mowing tractor, and it seems like I'm always doing that in the middle of the night, so those side facing lights are really a benefit. |